This weekend we are at a private farm with sealed strip at Marulan. Its a MAS event so feel free to look, help or have a fly in the electric trial. Details and precise directions at nswpylon.org , ...

This is airframe only as the factory ESC/ Motor is very expensive and still OK. The motor box needs repairing. So a HK conversion is the way to go. HTX 900's will fit perfectly. Less wheel pants $4...

Free or best offer Two Taranis standard sticks still in the empty case shell unused. The ones that ware out with a lot of use. Yes I now own a Taranis with M9 gimbals . Doesn't feel as good...

Just got this email, all are welcome to go and have a look. srl Well it is just over a week till the next race at the Richmond RAAF club. Given the fire and flood we have recently it will be gr...

This sale is open for all as the aircraft is not for a small field like Mccoy. Price $200 or near offer. Contact the committee at secretary@rcflyingclub.com I see in the youtube that durring a ...

We are welcoming any electric aircraft to race in sport (Q500). All the info here:- www.nswpylon.org And disscusion here:- http://www.rcgroups.com/forums/showthread.php?t=1270263 srl

I'm Just going over my CNC mill and my reading up tells me that I need one for better parallel port performance. I'm a Nvida Man. Doesn't mater how old it is. srl

Part of my moving sale. $100 with 2 batteries. Will be flying at Mccoy Wednesdays and Saturdays. srl

$180 20 months old with the nice sticks and non slip grips. The date resets so then the data logging will not work. Everything else is fine. It has the latest opentx. srl

I'm back using it again so sale has ended. 7 and 9's are the best value in FRSky. Thanks srl

Just been at the ANSW meeting. 20 persons max are now allowed to meet at the flying field starting tomorrow 13th June. srl

Anyone got one or similar of the following? http://www.hobbyking.com/hobbyking/store/__31242__Propeller_Adapter_Puller_Pinion_Gear_Puller.html The Ultimate as some of you know has been promised to...

All done, I made my own. I had two to remove from the old KatanaMD and yellow UltimateARM.

Yesterday I got to work to finish my replacement Ultimate and here it is finished. I rushed it down to the field when I finished it Sunday afternoon and put four batteries through it. It was a bit w...

I have a Emco Unimat Simon. It sounds huge but its very small. https://srlfoamies.com/a-light-cheap-f3f-motor/ The four jaw will do the job but it will take some setting up to get it centre. The t...

Hi all. I'm after a DX6i but it must have DSMx that has been available for the last five years. Market price is about $100, a old very used one went on ebay this morning. There was a good one for $1...

I have 2 hack boards for sale with DM9 cases. $60 each All the info here- http://johnprikkel.blogspot.com.au/2014/07/jr-dsmx.html (http://johnprikkel.blogspot.com.au/2014/07/jr-dsmx.html) To fini...

Will see you at the indoor Andrew. I'll bring some double sided tape if you want to install it. srl

Sorry Bob. Now only $56 on HobbyKing. srl

Hi Danesh Buying from the US just cost too much. For leaning to fly and flying at our field would you consider this - https://www.banggood.com/Cloud-Dancer-1300mm-Wingspan-Trainer-Balsa-Laser-Cut-RC...

Hi Gabino and Kieran. Association fees are reduced for 6 months of membership up until 30th June. $100 total to join the club. This covers council fees , insurance and field maintenance. For anyone wi...

Hi Giles Please call by on Wednesdays when members are present and you can drive in, or sometimes on Fridays as we cutting the strip. Because of lots of local and federal government rules you can...

Here it is a AddictionX in good and flying condition. It will need a good RX and a 2200 to 2600 3s battery. It has a full PA setup (HItec servos) and would of cost over $600 new. $200 for club mem...

Sold

I just want to remind all the pylon racing pilots that you must be wearing a hard hat, helmet with chin strap when there is no normal flight line (as you are flying around yourself). So now you have...

I'm ready to make some noise! srl

Practice when well. Seeing Col James fly his big prop turbine was very impressive! srl

I looked but I still have my EFX racer. How about a fast EFX fly past on AGM day Saturday week? Barry and Jason B? srl

Hi Carlou and members. I've found a few devices to be fussy with SD cards so sometimes going bigger and better doesn't work. Here are some of my radios. I've also added a new Taranis Access as I'm s...

We are racing at Pittown on the 30th. All electric aircraft are welcome in Q500 sport. Ten laps is 100mph in less than 2 minutes. F400 and F3d go a bit faster. Practice is on Saturday. Cost is $25 wh...

Had a great time last Sunday flying Q500/sport. Had to give this guy a hand. srl

Hi Rob Weather cleared just for practice afternoon and race day. It was good to get my hands oily again. Got every round in myself and came 4th. Calendar here:- http://nswpylon.org/calendar.html srl

Just like the real thing its reached its end of life. It has no structural repairs its just after 200+ cycles the servos and 1 retract are worn out. So good for parts. No RX. $20 ONO srl

I've just got in a new box of 6mm Depron to satisfy the recent demand for the Batix Extra. The build thread is here- http://www.rcgroups.com/forums/showthread.php?t=373243 The price for cut Depron an...

Hi Philippe Have you talked to Jeremy Randle at ACFR Rose st.?. I do contracting work for them( driving). Stephen Lange

This is also a reminder that on the 14th and 15th there is general flying and pylon racing at Marulan for MAAA members. There is a small fee > $30. There is a large sealed runway, power and sheds-huts...

I've been asked about single 6mm Depron sheets. The size is 100x70 cm. $20 each. I also have foam board 1016 x 815mm $20 Pick up can be Winston Hills or Mccoy any day this week . srl

Yes $30 for the cut Depron and a carbon spar. srl

Then its not just me with Frsky Archer. Could be time to change to the long time proven DSMX. Easy with a multi protocol module. https://lemon-rx.com/index.php?route=product/category&path=72 srl

I remembered this from over 10years ago, very impresive back then and now. At the time because of the A$ our members were more interested in $5 DSM2 orange RX's from HobbyKing than DSMX. https://ww...

Its quite windy . I was on QF430 from Melbourne today. We were well warned it was going to be a rough ride in. A full 767 we came in over the Eastern suburbs. Only a hundred feet to go its too much, ...

Hi members and visitors I walked in to Mccoy from the Toongabbie side and council was there preparing the field for us. For members I've just written the new gate code on all the new MAAA ca...

Here's the latest guys. will be flying at the Strathfeild Indoor this Thursday. Its so cold outside ! Its great flying weather but the LIPo's are not working good in it. I re wired the ar6300 dire...

Hi Dirk I've got Phoenix, Realflight 7.5 and AeroFly (on Steam). All are good but I say Phoenix. Updates are free and it is the most common among our members. I bought mine about 8 years ago fro...

Seeing a Facebook post I believe Jason V is in the outback somewhere, probably SA. I when down on Friday and did 4 hours of flying in perfect weather. I had work Saturday and Sunday. Had a look at...

Hi Jason I'll be down early Saturday for some sport flying. But I need some fuel for the 46. Who sells it these days? srl

Hi Greg Parramatta Radio Control Aircraft Club has a covid risk assessment submitted to Parramatta Council for our ongoing sporting field lease. A new risk assessment to comply with the current two...

A email from our landlords. Dear sports clubs, associations and hirers To protect the people of NSW from the evolving COVID-19 outbreak, current stay-at-home orders have been extended acros...

Hi Carlou It looks good. Do you have a link for any information on it? When finished have someone go all over it before you fly it like Peter Hart or Jason V. A full check of the aircraft is standa...

Model railway shops appear to be still about I guess because of a strong second hand market. They of course will have the K& S bar. http://www.ksmetals.com/ I did a google search a while back and fo...