He likes to keep things low key, so what can be more low key than a big HAPPY BIRTHDAY DARREN!!!

Dude you have training gear here....

Pre cut flaps and moulding for flap servo's and e-tract ready moulding

Nice Job :thumbup::thumbup:

You shouldn't have to hold the trainer button on the DX7 as there is a dedicated bind button on the back. You plug the bind plug in, apply power to RX then Turn on TX whilst holding the bind button o...

Confirmed! Field is very damp and it's a bit windy. If it stays windy and sunny, it should be ok for tomorrow but the water was above the Concrete last night.

Looks like we have a gate issue, It is on the agenda for the next committee meeting on Wednesday, all welcome!

It's only a Serving Suggestion ;)

Awesome, Mind if I post em on the website?

Thanks for this Jason, I'll have a look at these. The more I look into this, the more I'm impressed, I'll probably do a whole set of audio files next time we have our voice over actress in the studio....

Yep, wind could be an issue tomorrow and Sunday, stay tuned to the forum and I'll give a report as soon as I get down to the field as to whether I'll be staying or not.

Sounds like you've hit the torque limits of either your servo's, control rods or control surfaces. Be very wary that you haven't stripped a servo doing this as it could be fatal later on. Craig had th...

Darren cant make it down to mow tomorrow, he's looking at a day long dentist appointment

Happy Birthday!

You can also fly it for free in the new MS Flight game (Not a sim anymore :( ) http://www.microsoft.com/games/flight/

I also can't help but notice that FR-Sky just released a new radio with Dual module support and Open source Modifiable OS! http://www.frsky-rc.com/NewProducts/ Must keep an eye on that if I ever come...

I'll be down at the field tomorrow morning from around 9ish. I was down there on Thursday and it was still a bit wet underfoot so don't be surprised if we have closed off driving down to the field or ...

At this stage, I'll probably post the order tomorrow or monday. I'll be away when it arrives but one of you guys can pick it up. This will probably be our last chance before the Chinese new year madne...

Thread for spare parts requests! Anybody got a Turnigy 35-48 -1100kv motor lying around?

I always wondered if a 3s 2200 would pull it off! http://www.youtube.com/watch?v=1w_K08fwZnA Something to keep in mind if you're ever stuck with a flat!

It did today, just not in the manner you would like or expect ;) If Darren agrees, I can show some footage of how you conduct taxi trials Btw Dave, "Included in any required?"

Flash to latest version, Reset all settings and run stick calibration. Throttle down push rudder right, Should Arm!

Had a change of plans, so I am down at the field now. It's pretty firm considering the rain we've been getting. About to drive down and see if the car damages the field. If you come in and see my car ...

Wow looks good, different design to HK, looks like it takes a bigger battery?

We found the problem ;) Trashed my heli today, let it get too far away and lost orientation... Rob has pics. Now to stick with 450 or go 500!

Yes they're small but If you look at real Trojan's (Which are a fricken massive aircraft) They're actually not that far off!

[quote='Kedumba' pid='6196' dateline='1306276733'] [quote]Don't lose faith mate, those motors are all from the stone age of around 2005-2006.[/quote] Your right!! I was so busy reading the posts tha...

Good idea

Hmm, look what just turned up on the doorstep! Whatever shall I do with all of these? Or this junk?

Worth noting that you can currently get: Very tempting as you can't get the plane alone for much less than 150 here.

I'll sling you my spare

I would happily donate a motor esc & servo's to a club plane, You buggers can build it though, I'm only a half decent pilot cos I can't afford to crash and rebuild

Might as well swim over ;)

I have a brand new unused one of these if it will help: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=14616 It'll be going for sale soon.

Unfortunatley the Siren video didn't save. Here is a vid I captured a few weeks ago though, Check out the servo working away on the left hand side of frame and the amount of wing flex! Also, I totally...

I see all these dad's not being able to fly on their day?? I thought the point was a day to do what you wanna do ;)

Good report Dave! Absolutley gutted by the Stryker failing. For those that didn't get to see it fly, It had some massive control surfaces and huuuge throws. It was also quite tail heavy. This made f...

Hoping A51 will be open tomorrow, heading out around 9

As far as I know, both these airframes are EF1 legal: Pogo http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFL4200 Shoestring http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFL4205

Lol, this is like a replay of my convo with Steve last nigth!

Wing type= Delta in your radio, servo's plug straight into ELE & AIL. If you just can't seem to get it working right with reversing etc, swap ports!

yarrumevets Wrote: (05-04-2011, 10:50 AM) -- who needs an API? -- ↑ Lazy webmaster does!

If you must have Boomerang shots, Sorry if this constitutes cheating ;) I would kill to have a spot on the glidescope, those photos are great!

Quad is temporarily grounded till I get myself some better props, the ones that I ordered are terribly unbalanced, going to replace them with some 3 bladers from Goodluckbuy! http://www.goodluckbuy.co...

Ok guy's, yes it did rain last night so the field is probably damp, lets get down there and do the planned work atleast and evaluate from there?

Wont make it this weekend, Have fun guys

Happy Birthday Mick! Also Happy Birthday Paul in 1 hours time!

I'd put money on this shaft being a match: http://www.hobbyking.com/hobbyking/stor ... oduct=6486 (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6486) Stephen also posted this in...

Will just point out that I successfully navigated a marriage after joining prcac, hell I've had the last 8months off work and am still managing (just, I don't recommend this for anyone!). Comes down t...

G'day Folks, Back from Temora, I trust you all had a great weekend from the posts! The weekend was largely enjoyable, Maiden flight went very well on Friday: However on Saturday: :cry: Norm...