Heading down now Steve

Hi Guys, I wont Be Flying Today, off to work, Not Sure what the Condition of the Field is as we did get a little rain last Night. Enjoy Steve

Chris Mc Wrote: (13-06-2013, 08:30 PM) -- Sorry Steve, wrong Chris I'm the newbie with the Cessna 182 1420mm -- No worries, Like the guys before posted before me, just ask and we are all more th...

Is This The Cris I know That Jet Skis and Flies the Durafly T28 and hasn't been seen for many months, If it is, were have you been :D and re your flying skills when i saw you last was close to solo a...

I understand what your Saying, But i Guess they need to price it enough so there a viable buisness Too, All the Hobby Shops Know that Hobbyking is There and, If They Dont there got there Head in The S...

I will place an order for 1 plane please:D I have plenty of high powered setups that i could put in it. Steve ;)

Old Thread That needs a New Picture Added This is what Happens when you do loop do loop about 3 metres from ground at full Throttle, The 4th loop and the plane wandered off course a little with a b...

secant0give Wrote: (11-06-2013, 10:58 AM) -- Work has started on a plug for a fuse mould. It's mad from Sugger pine, mainly because I had a nice peice laying around and it's very nice timber to work...

http://youtu.be/QrgTtZXuj4w If i can make one smaller enough to power my jet with 10 pulses a sec ;)

Prop Slot Noise, This is very Interesting Stuff and Going to give this a go with the Stryker Q, Even though stock Stryker Q is under 80db, and with my custom lower kv motor prop configuration makes it...

I Think Once we can Confirm the State Field is available, i Think having a Big Prcac Away Event and Temora Show Visit is a Great Idea and i will be There and i think alot of Other Prcac Guys will be ...

Weather permitting i will Be Flying Tommorow Morning Steve :)

Yesterday Afternoon Steve :)

It Looks Like Someone is enjoying all the Rain, noticed when i zoomed in

Servo Wrote: (30-05-2013, 12:38 PM) -- Indoor flying this Wednesday, 5 June, 7.00pm ish at Hills Adventist College, 2-4 Gumnut Close (cnr Hezlett), Kellyville. Great venue, if you are new to indo...

Very Funny :lol: Steve :)

Going To Give the A Spec a Go to see if it is worthy of all its Specs that it announces. Been Using the Nano Tech 6s and Zippy Compact 6s In The Stryker Edf I have Found after about 15 Flights ...

Hi Paul, Interested in Kev's Sebart, will give you a call Steve :)

Frank they do Look The Part, Nice Job, great color Scheme. We can tell That someone likes Rare Bear Racing :D Steve :)

Popped in at the Field Today and its Looking good. A Very Big Thankyou to all who Help In the Maintenance of the Field, Special Thanks too Peter H for helping out with the Field Maintenance Too. ...

Managed to Drop in for 1/2 hour between jobs Today was Windy but this did not deter many as there was quite a lot ofpeople down there. I am looking Forward to Some Flying Tommorow, lets hope the We...

Anyone ?

helijeli Wrote: (05-05-2013, 12:37 AM) -- Annoying... had all my batteries charged, then had a callout for work this morning at 7:30am (to go to Wagga!) Just got back. Visit to family at springwood s...

Mick You always amaze me with the suff you build from Scatch,. Nice Work again. :) Now thats going to be a slow slow low pass ;) Steve :)

Working Tommorow, but may finish early and hopefully get down for some flying Time. Steve

Glad that that was only the damage caused as you hear about some bad cases. Possibly The Charger could be Faulty as it shouldn't charge unless the correct amount of cells are detected through the b...

Where is everyone I'm keen before it gets too deep. :twisted:

I'm working Tommorow so flying for me me will be out unless i finish esrly and if weather allows me.

Nice Collection There Adam, Remember to harass the Instructors for your Bronze wings. Steve :)

gbanger Wrote: (16-04-2013, 03:20 PM) -- You D man Kieran... -- Yep definately Knows His Rc Stuff, Rc Guru King :D If Only I knew Half The Stuff He Knows :) Steve :)

It's like new, What Crash :D Nice Job Steve :)

I Twist them all together tight with my Pliars and use my mini blow Torch to solder Together. But If you are not confident in Soldering Fallingwithsky the easy way would be to Buy 3 of the made up ...

Thanks Today To Gazz, i manage to get a warhead 1850kv motor to fit in. Well This is Confusing max Amps now is 118 amps. Using same esc and settings and 6s full charge lipo this is what i get - ...

smuzz Wrote: (14-04-2013, 05:41 PM) -- Wow - you've been busy mate! Get much sleep last night? Good work. Makes me think how far you've come since the "Sonic Saber" days :) -- Lol, I remember Thos...

Viper Is Back on Build Bench with some Major Overhaul and Customing. I will Get This Viper Up and Flying With Power To Burn. So i Ripped Out the 90mm Edf, which was Hard Work with minor Damage as ...

Heres an Idea That may make Things Easy ;) Hard wire all escs to one point and then one large short gauge (Min 12 awg ) to one xt60 connector for connection to Lipo. Why put xt60 connectors to e...

secant0give Wrote: (12-04-2013, 09:44 AM) -- test flight tomorrow ?? -- ummmmmmmm i thought i would put it back in the roof now that its Finished ;) It will be a classic in the future with no m...

It Just Fits Nice :D All Done, slight Hicup as i had to do 2 servo reversing the manual way. All Trimmed and a little Test done and Uploaded To You Tube. http://youtu.be/8EM3sPY0fZc

Yeh i Know, but i have concerns as this model does fly Heavy and has high wing Loading, so i wanted the power to help with its flying characteristics. Maiden will tell all i guess, Almost Done ...

Sweet, Sounds like the 6s Rarebear a winner, definately looks very nice and sporty. Steve:)

Yes Very Nice box Great for transporting, less chance of damage. Steve :)

I Have altered My Lipo Tray Holder to Correct Cog including some lead to front as going by several threads Cog is approx 70 to 75 mm Edf testing - I have concerns with Amount of Power i Going To H...

Tonight Update, Not Much Time Spent. Canopy Lock Installed & Lid frosted white, Lipo Tray & Fastener Installed Steve :) Edit : Not Sure If This Is Correct as i cannot find my Viper Manua...

Not a Bad idea Steve and your right it will want more air, Possibly make a scoop using the belly lid front part when i refit it ? Steve :) Edit : This is what i have Done for more Airflow ...

Yeh, Its a Little of Mucking around with the servos, and i was going to do it this way and looked up on web and saw a few differnt ways of doing it and this was one way that had been done. The other ...

They look good, and nice Job. Steve :)

OK, I spent 2 hours mucking around with twin rods to back elevator surfaces and heavy duty servo at front to push and pull elevator control. Well i came to a realization that it great pulling the ...

Thanks pete for the upload of video of Stryker Edf, does look fast when you watch it on the video, But It Just Seems not as fast when i'm Flying It. :) Talking about Speed the Glder Setup is fast b...

Heading Down shortly for a couple of hours, If ya want a buddy Fly, more than Happy Too. Steve :)

Nice V3, 580kv Motor will give it that extra Power on 4s nicely. Is the prop The Same stock Size as the older Versions ? Steve :)