G'day All Walking home from toonie station today it looked like a lot of rain had fallen. I suspect the field may be back to swamp status? Cheers Rob B

G'day KV As you know I share your pain. Our problem was more a velocity vector issue as the sky seems to have been repelled in our instances. Cheers Rob B

kizza42 Wrote: (22-08-2011, 08:06 PM) -- I like the plan & it looks good but maybe a bit on the fragile side, I'd want something really really simple that you can abuse and not worry about. There are...

G'day Andrew You pose an interesting question. As Drew stated pretty much all club members are 2.4 gig Spektrum or JR user. I suspect that we got that way as we had heaps of advice and support to g...

Gday Mick Good stuff, the Morane Saulnier A1 is one of the prettiest aircraft around. I have gone through miles of basswood building structures for my model railways. You would be able to get some...

G'day all If we get the weather I just experienced in adelaide today up here we are in for some mighty fine flying conditions. It was 26 degrees and 100% cavok. Also a message to andrew r, your colle...

100% with you Andrew, you've got my details on your petition. www.qantaspilots.com.au Get in there people Cheers Rob b

Gday Andrew Mate that is a long time to be not flying? I'd be going nuts if that was me. Hope the shoulder is on the mend. FYI I will be on QF569 to Perth later today, this 767 will of course be ...

Gday All I will try to bring some weather back from Perth with me when I return tomorrow. It's an absolute ripper of a day here. Cheers Rob B

Hey Hey... Happy Birthday Kev ya fossil. Congrats on being one year closer to the Zimmer Club. Cheers Rob B

G'day gazz Congrats on the gold wings and instructor ratings mate. Well done! Your challenge now if you choose to accept it would be to guide a student around a single circuit using only the words an...

Too funny claudio I stand corrected, however Gazz wouldn't have a hope in hell of passing your challenge. We need to be fair and set achievable goals. Apologies to the other new goldies out there fo...

Gday Paul That's a good wicket you are on there, I would find a 3rd Party In House repair service highly useful. Message to Paul, when you have repaired the Kev J induced carnage can you do him a ...

G'day Kev Nasty stuff, I note the fatalities now number 10. From viewing other footage a few meters difference to the impact point could have added to that toll significantly. Cheers Rob B

Gday Jason 2m M Grade EPS for me please. Cheers Rob B

G'day Kv Whilst trying to get my head around just how awesome a turbine powered Habu would be I realised I could make some enquiries on Monday to see if we have any jobs around for you at Flitech w...

Gday All Weather report for the weekend fits firmly in the category of "Shithouse". Saturday 1 OctoberSummary Min 11Max 19A few showers.Sydney areaCloudy. Scattered showers. The chance of thunde...

Gday Dave So you grabbed a T28 eh? If you shove a torque tube through the fuse centreline just below the elevators you should have enough extension to attach the tail rotor quite easily. Gyro sh...

G'day Jason I am looking forward to getting my hands on these cores. My plan is for a twin 70mm edf setup. Can anyone suggest a good HK fan that is ready to go? I don't want to have to assemble e...

G'day Paul My setup is very different. I have inboard flaperons actuated via internal rods, 1 servo per side. Then to the flaps that extend via screwjacks and drop via mechanical linkage. The screw...

Gday Paul Easy inspiration is too look at how the real thing does the job, then duplicate in minature. My project is a 767-300, 4m span. Fuse is built out of geodesic carbon rod and fibre, wings...

G'day Gazz I too don't really follow the Ford\ Holden thing. The cars are purpose built race cars and are so far removed from the street models that aside from the overall shape they are on a diff...

G'day Andrew Hope the trip to the cutter goes well today. See you back in deck soon. Cheers Rob B

G'day guys Keep an eye on the weather I am at Syd airport and it is raining here now. Cheers Rob b

G'day John Greetings from downunder. I am in agreeance with Dave, the nanotech packs from Hobby King are hard to beat. The turnigy 3S 2650 nanotechs that I use have a discharge rating of 35 to 70C an...

G'day All Nothing like a good mid air to spice up the day however there is the safety aspect to consider as well as courteous airmanship on the flightline. We should not forget that the absolute ...

G'day Jason Good stuff, I am really looking forward to getting my hands on the core. Thanks again for organizing this. Cheers Rob B

SOLD I will give you a yell to seal the deal. Cheers Rob B

Gday George No worries, we should consult the resident jet jockeys re good fans etc for this baby. There is plenty of 90mm jet action occurring at the moment within the club so I expect we will ha...

Gday Arron I know what you mean, I literally cannot remember when I last had a fly of my fixed wing stuff. I have this sexy looking box with all sorts of switches lights and shit on it, it has DX8...

G'day George Just sms's you, where are you going to be today? A51 or mc coy. Looking at the size of the box there is no way that is going to fit in my car!? Cheers Rob b

Gday All Although I really should not be buying any more aircraft this puppy is making me drool uncontrollably. http://www.hobbyking.com/hobbyking/store/__19730__G500_Fiberglass_90mm_x_2_EDF_1860m...

G'day Gazz Yeh I am in the same boat, other stuff to finish. Having said that............. Looks too damn nice! also, seeing as you are a 90mm fan expert could you look over my HK order for the ...

Gday kv And I am testing their smaller version soon? Big bro of the 64mm on the way? Cheers Rob b

Gday Jason The cores are awesome, thanks heaps. :thumbup::thumbup::thumbup: Will see you next weekend at the field to $ you up. Gonna be a hoot getting a 64mm mercury EDF installed, and hacking...

Gday Mr Barnesy Yep I will be there on the 16th, I have been looking forward to this since about 10 secs after I switched the mike off last year. Your ph # for me is correct, just got your msg. Just...

Gday Dave Go digital mate, I use 11g HK digitals, they are cheap as chips, pretty fast and punch out 2kg. I have 8 on order right now. (See my HK order for the link). Only caveat is that their dead...

Gday Jason I am going to use square carbon rod for the main spar and then grp rods for secondary transverse spars and then smaller sections back to the trailing edges. I have based this on the meth...

Gday Dave Apologies, completely misinterpreted your post? Cheers Rob B

Gday Jason I have quite literally just finished reading right through that thread, I guess our major point of difference is that I am using an edf rather then a prop. Cheers Rob B

Gday Steve The correct power curve descriptors could be: Stock Adequate Ample Heaps Irresponsible KevBlazeviched Cheers Rob B

Gday Dave I use flaps and/ or flaperons on my gliders. Using the 3 position Flap switch I start in the middle (POS 1 zero flap/ clean wing), POS 0 (Flap up/ reflex) POS 3 (Flaps down), I have the A...

G'day Jason/ Steve Thanks for the input. Jason, this is a very versatile foil from what I am discovering. The more I think and plan the B2 is getting more achievable. The only part I haven't rea...

G'day Gazz Geez, did you insult the god of retract servos at some stage in the past? You seem to have some fun and games with the ol retracts. I recall a similar tirade from you when you were setting...

G'day All Judging from the constant rain overnight here at toonie I would say mc coy is well and truly underwater. Cheers Rob b

G'day Gazz Yep the weather is diabolical, I am in town and cannot see the tops of most of the high rise buildings. Cheers Rob b

G'day Steve Is Hannah the chick who was largely a test pilot and flew ME262's during their development or do I have her confused with someone else? Cheers Rob B

G'day All Nice vid Gazz, looking forward to upcoming episodes. Quick question, when you join an edf motor to esc do you use bullets or just solder wire to wire? Cheers Rob B

G'day Frank Seeing as PRCAC is an all electric club you are in the right spot to get some excellent advice. May I suggest you post up some specific questions so we can get started? In the interim pay...

G'day fellow Vipernauts My first thought in regards to the elevators was to mount the servos up near the fan. Then use goldnrod routed up the fuse outside the duct tube to connect to the elevators....