Well "God Damn son" I recon Ive got a pretty good idea were all those morons are from...

This link is intersesting because it has some very good reading, it also demostrates the right control inputs but the guy at the controls flies Mode 2, what a maggot! http://www.troybuiltmodels.com/n...

I had to come into work for an hour this morning and the weather has been pretty good thus far, I hope to get down later this morning for a few hours if the weather stays fine.

It should last a bloody long time Jason. Have you seen the price on the website since the introductory sale finished. I was going to get one but missed out on the sale. They have gone up in price...

Nice work as always Steve. Seems everytime you hit the field lately, I am unable to help due to work commitments. I'm sure all the club members appreciate your support ... and if they don't... I am ...

Gentlemen Could we please open a new post for this subject and not fill an important sticky with discussion... Thank you

I'd agree with Jason on that one. I would suggest that your approach is either too fast or too slow, and you closing rate on the grond is excessive. You need to work on getting that feather just righ...

Clever thinking Jason, good to see you thinking outside the square ... As usual !

Steve The place that I was talikng about that sells all the FMS range is Charged RC in China http://www.chargedrc.com.au/vmchk/FMS-Aircraft/View-all-products.html

Nice one Wayne. I'm glad it went well.

I am flying out West today.

Thanks guys.

Well done Wayne. I'm looking forward to see it in the air.

The wings should be quite firm on the spar... you don't want to any play in them at all... so if you are going to give them a sand then proceed with caution... ie: sand a little and check fit a lot. ...

That definately looks the goods Jason... I might just have to get one myself... at that price its a steal! I went online this afternoon to buy one but the price has gone up but $400... Oops !!! It...

I dont know the aircraft... but just a calming comment, don't get to stressed about your speedie location, unless it is working at peak load most of the time(and I'm sure it's not) don't worry too muc...

Retract Installation The Big P51 comes with a very nice set of high quality mechanical retracts. I was looking at using servoless units but these things just looked to good not to use. The only let ...

Skidz Wrote: (03-02-2013, 09:24 PM) -- "Driver of the de-railed gravy train"... ;). Capisco quello che dici. -- I don't know what you've been smokin' Dave but can I get some!

Hey Kieran I am about to download DCS World, do I need to download the extra files on the home page and what do they mean by put them in 1 folder?

What a great spot to fly, cold Miserable Tasmania looks pretty bloody nice to me!

You can forget about flying this weekend. It is bucketing down, see you next weekend... maybe! Looks like a good weekend for catching up on those repairs you have been putting off... either that or g...

I have just arrived home from work and it did not stop absolutely bucketing down all the way home. The field will be a no go for this weekend. Might try and get a fly in out west on Sunday.

Sorry that is just a term that I use and probably isn't correct, primarily I mean adjusting control thows on your radio and in particularly your preliminary end points, it depends on whether it is Ail...

The Aileron and Flap servo installation is finally finished. All of my control surfaces are being run by a new servo that I have never used before, they are Turnigy TG 1258's I am hoping that all the ...

Hi Guys I thought I would start a thread were people can paste links for stuff that comes up on RC trader that might be of interest to club members. I get an automatic update every 24 hours and occa...

We were very lucky with our Australia Day weather, weren't we!

Hobbies in the Hills has a pretty good range of 3 blade Master airscrew Props, Ive bought my last 3 props from them for around $12

Im now flying my FMS Trogan on 5S 4000 25C and I'm spinning a 13 x 8 x 3 blade Master airscrew and it draws 42 amps static so I recon our aircraft have the same motor for sure. So if you wanted to get...

Thanks for the effort men, it is very much appreciated.

That's the 2012 FMS catalogue ya maggot! Would you like me to bring it down to the field... it's got some cool stuff in it!

Don't sweat to much about your build time mate. I'm still building a 90mm Jet Teng L39 that I bought 2 years ago.... Its almost there... but not quite.

OK up till now I have been making desicions on what hardware I am going to use. With those decisions finally made and ordered, all of my goodies have finally arrived. So here are a few pics of "What...

West systems is good shit but a good quality 30 minute epoxy is more than sufficient. If your clearances are a little on the large side you can use a dash of talcum power (even though micro ballons ar...

All this mathematics is going to make my head explode ..... I use the Gazz equation.... MORE POWER RULES!!! But not before doing the Ecalc maths of course!

Yes mate, its a normal flying weekend, we are just throwing in a Barby and a couple of other minor events to make Australia Day a bit of fun.

Members start arriving from 8.30. Most fly untill about 12.30 to 1pm, but on a good day there are people there until 2 to 3pm. On a perfect day you will still find a few there as late as 4pm. Gazz

What servo's are you using Wayne?

Where did you get the scale? That sounds like its just in the right range.

Lookin good George... will be nice to have the maiden at McCoy... just don't rush it!

Here is the link. http://www.hobbyking.com/hobbyking/store/__19723__F_86_The_Huff_EDF_Jet_70mm_Electric_Retracts_Flaps_Airbrake_EPO_PNF_AUS_Warehouse_.html And yes its in stock and available fro...

It doesn't look all that prommising but if the rain hold off I will be down for a few flights at 9. I will bring my 11X manual for you to borrow Steve. Here is a link to a PDF copy of the manual ...

That ebay seller has a lot of very nice aircraft Jason. If I was in the market for another plane i would be ordering one from him right now. Nice aircraft at great prices.

I will be flying Sunday if anyone would like my assistance. Cheers Gazz

Get your paper work in and stop fluffing around Angus. Then you can give us all your money... just before the hobby shops take over as the primary funds depleting organisation... and believe me they w...

Big thanks for the effort as usual Steve. Does anything else need the once over? If the weather is kind I'm happy to come down at the preverbial sparrows fart tomorrow morning early if it needs it.

I will be flying this morning... probably won't be flying tomorrow, but you never know!

Thats not good enough Wayne. I think you should go out and buy one, as a matter of fact...why don't you buy a ride on? :D

Now that's a sight for sore eyes... sweet.

All we have to do now is get ride of the the bull rushes so we can start reclaiming the main runway. We will speak to Parramatta council about it first, if we get no joy from them we will have a chat...

What a bunch of braindead fu#&@n maggots!!! Maybe next time these retards deciede to have a flash sale .... they actually check stock levels prior to making offers that cannot be fulfilled