You may be right that its the Prop thats loud but i have found that using in runners for pusher seems to be quieter than the scorpion out runner, Tested motor without prop and and it tends to have res...

Yesterday Afternoon Steve :)

See you guys Tommorow if Weather holds out. I Reckon the Weather may scare some off But we May be lucky :smilie: Steve :)

Rc Large Scale Jets In Quakers hill Today. https://www.hawkesburygazette.com.au/story/6217253/replica-jet-show-set-to-run-for-charity/

Drew Wrote: (23-05-2011, 05:40 PM) -- Woo Hoo!!!! I just got the third axis (Y) of my CNC connected and they all seem to move in a sensible pattern. I'm going to try and draw a spiral tonight (brow...

Hi I'm Mr Panther, I'm Lonely and looking for a new Home Too and i'm new in the box great for Xmas Present under the Tree. ;) P.s Don't forget my Friend Mr A-10, his in here too, in the for sale se...

Lol very Funny, Wayne your looking Good. Steve

I cannot believe there was not one crash with so many up there flying. unless they edited the crashes !

srl Wrote: (17-07-2012, 07:06 PM) -- I only have this. -- Verry Nice :)

Driving past Today between Jobs, Thought check out the field condition. Pics below, surprising not too bad still very soggy in some areas where it was flooded but was an easy not muddy walk to flight ...

Nice Collection There Adam, Remember to harass the Instructors for your Bronze wings. Steve :)

Hi Guys Just thought I'd mention that i will be down field tomorrow arvo if the wind dies down if any else has arvo off and wants to fly. Will post before heading down though. Though i Think the w...

It's been a while since my last soldering of an xt60 connector, i understand they put xt90 on these new high discharge batteries for the current, but my EDF Stryker only draws 150 amps at full throttl...

Manage to get down field This late morning and gave it a somewhat of a haircut with the old faithful hand pusher mower to half of cross strip and to a patch of dry area on main strip. Not sure how m...

For Sale Brand New In Box DF-032 Panther Combo Set brand new in box. This combo included Panther Plane, brushless motor, ducted fan unit, 2X micro servos, servo extension cord and launching pad...

To Be Honest i was there Tuesday and the conditions did not improve when i saw it Wednesday and then we had a little Rain on Thursday so really the conditions i dont Think have changed. Which means th...

Ebay site cheap motor i'm running in island hopper RC 2600KV Outrunner Brushless Motor plane A2208 5013 with 6x4 prop motor link http://cgi.ebay.com.au/RC-2600KV-Outrunner-Brushless-Motor-plane-A220...

That's Turning out to be one Fine Looking Plane Mick. :thumbup: But Captain, Will She Fly. Steve :)

Wow Superfast Delivery From This Supplier, Ordered Saturday Afternoon got Mon Afternoon :D Pictures Below Of Plane, Plenty of room for Lipo, Looks Good All round. Steve :)

Yeh, Its a Little of Mucking around with the servos, and i was going to do it this way and looked up on web and saw a few differnt ways of doing it and this was one way that had been done. The other ...

Will be down Tommorow with With war wounds From Soccer Semi Final Game That i played Tonight. Lol i survived Thredbo But In pain After soccer. Will Bring Down Funjets for Con and John and a Spare ...

Thinking of heading down myself this morning for a couple of hours

Some Toys were Waiting at Post office for me :) http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=15534 http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=1623...

I will be out and about Tommorow so i will try and do a pic update of Field and its condition. That being said it really needs a mow if it is in ok condition for the weekend. Steve :)

My 2 cents worth, I use 5 min Epoxy and have been for everything, but i tend to do little sections at a time as it cures in 5 min, But That works for me and strength wise its been fine. Where i need ...

Still no joy Tried nearly everything ,did notice that it still has the models stored so reseting doesn't seem to work or i haven't done it properly. Just got back flying at the oval next door to me to...

George, Jitters could mean numerous Faults and rx Blinking or powering off. One Faulty Servo can cause the rx to blink and shut off or jitter all servos when control input is given. I have had this...

I told my Off Sider that i was going to land the Glider right at his feet. He Didn't Believe me LOL :lol: :lol: Great place, so open to Fly . I Remember the sneak approach Next Time :lol:

Been Down To The Field This Morning for an Hour, There is a Few people done Enjoying the conditions. The Field is in Good Condition and the Rain has not affected it all. Hoping to get some more fl...

I had a Chance this afternoon for a speed test on The Pogo I did a speed Test with Pivot Tube setup above Running 80 ESC, Eflite 1250kv, 8x8 APC prop, 2250 4s lipo 40c Horizontal speed 162 kph ...

Paul it uses a thumd stick lever on handle bars that inputs to 24v 500 watt speedy but you could also use a motor bike style throttle as well. There are many types of parts and kits out there to cust...

Looks like some Fun and great day out especially with all welcome beginners, experts, can imagine some great carnage to debut. Steve

Claudius Wrote: (14-03-2012, 08:16 PM) -- Just joining the chorus of thanks for the mowing effort Steve B - myself, our new member Angus, John H, Kev B and SRL made good use of it today... and hopefu...

Met 163 Komet Just Got Mine delivered, Very disappointed all hinge surfaces are cracked and falling off, Cheap brittle Foam, Paint peeled in spots.Rudder was totally broken off. Impulse Buy Wil...

I don't know how that would work as i want to be able use the throttle stick control for both motors not a dial or switch. ? Are you talking mixing functions ? steve :)

Kieran Is Right, Though i Tend to Fly It Nose Heavy. As it seems to fly sweet That way, especially at high Speed and tend to give it elevator when floating. Finally All Done 9.5 hours Total Build T...

Quote: -- gbanger Wrote: Howdy all Yo Sky Fun Jet compatriots Steve suggested upgrading or replacing the standard motor mount as he has had 1 or 2 fail Does anyone have a part number or websit...

This Looks Interesting form Hobbyking, Not A Bad Idea for Clear No Interference Signal, Drag ? http://hobbyking.com.au/hobbyking/store/__72892__HobbyKing_8482_Retractable_FPV_Antenna_System_with_Ex...

I make my own by simply using existing servo leads and soldering then Heat shrink sleeve over join into a why configuration to the size i need. Is this what you are doing Paul but crimping ? Steve...

dwils Wrote: (21-10-2011, 06:51 PM) -- Planning to mow sometime tomorrow -- Heh Darren are you Mowing with The Field Layout Changes ? Steve

Not a bad Price for Pnf Plane, Escale seem to be doing quite a few cheap Planes at the moment. Steve

Looks Nice Steve. At first Glance i thought what has he done with one of the q500's, as it looked like only half a tail. But closer look you can see the other half. Was thinking of heading over at...

OK guys here it is ! When throttle is up on plane all controls are lost ailerons and elevator. when throttle off aileron and elevator controls are restored. Thus Faulty bec in speed controller while ...

Here are some online plane parts web sites that may of interest to some http://www.wiredrc.com.au/shop/index.php ( Great Honest Shop In Qld online ) http://www.bidproduct.com/part/Menu_menu...

Hoping to get down tommorow for a couple of hours, will post in morning. Steve

OK Had a maiden Flight With Transmitter. Was A hairy event as i launched It i found myself in somewhat of a situation trying to control a twitchy as all hell plane with the slightest movement, it w...

So Monday is a holiday, So is anyone Flying Tommorow, Was Thinking of Getting some air time in :) Steve :)

Hi All Hope everyone is coping ok with this Heatwave were having. Not sure how Today's Flying went with The Heat, It was a Scorcher. I will be down Tommorow very early and leaving Early before the ...

Just did a Test Flight with lipo Back a Bit and increased up elevator movment to help when touch down nose overs on slow down . A major improvement, Sweet. But i guess the field at Prcac is alot mor...