Thank's Paul How did the mount go, is it ready for a successful flight tommorow. Ingo said he will be down from 8-30am Steve

Not to Hijack This Thread But Its an Elite group who Fly the Old Stryker Frames, Even Gazz had To Pass the Strkysee Society Test to even get a sniff of the Stryker Frame. Still needs to complete th...

Sorry to hear what happen Paul, Hopefully mail drop will be successful.

I too planning to head down but after lunch after I get some things done

Thanks Guys for the Advice i ended up cutting the film to epoxy the balsa with in as it had a fracture/Break, from hard forced landing that was caused from pushing the limits to Standard Frame without...

Who is going to buy This, Its in Stock Australia warehouse https://hobbyking.com/en_us/h-king-flycat-70mm-12-blade-edf-jet-1042mm-41-pnf.html (https://hobbyking.com/en_us/h-king-flycat-70mm-12-...

Thanks for the waether update, I'm hoping to be there Saturday. If The Field is Up To it. Steve :)

Heh to all with stock Parkzone Trojans, I have stock motor and instead of upgrading motor, i have tried just upgrading prop size as i been playing with a few props and sticking with stock 3s 2200m...

http://www.thisiswhyimbroke.com/ I love this Website, Check out the Flying car on this site Steve :)

Speed Testing This Weekend Just Came in mail, will be able to set up on other planes as well, quite easy

Hobbyking 2 metre wing span Composite T28 Trojan Appoximate Costings Motor $190-00 Esc $180-00 Retacts $160-00 Servos $100-200 Lipos 2 x 6s 5000ma $140-00 Bec $ 30-00 Wheels $20-0...

Quote: -- Ok Kieran, at Cudjel if you screw up just this much, you'll be flying a cargo plane full of rubber dog shit out of Hong Kong! -- lol :lol:

I have Contacted the supplier of my spektrum rx's genuine AR6200 2.4GHz DSM2 RC Receiver Specification Full Range Aircraft Receiver Channels:6 Modulation:DSM2 Band:2.4GHz Dimensions (WxLxH...

Hi Guys Popeyepete and Sydrob, I will be Down next Saturday morning and Will bring My Island Hopper Complete with Dual Transmitter's and Buddy System So you can have a go at Flying if you like. St...

secant0give Wrote: (02-08-2019, 10:11 AM) -- Hey that should be a real hoot to fly Steve !! What day will you be down at the field? -- Was Down Today, It Flew well But not Fast as i would like, 4s ...

Your Right paul and Kev, Sealed Up Edf Inlet and She's smoking Hot Now. Need to Really get Started On Getting Wings On so It Doesn't look Like a Rocket ;) And Finish off Playin Around with Led'...

Ok so its the weekend again and the weather is ? And where is everyone going Tommorow, Area 51 ? Pemac Swap meet ? Pub ? Pub Crawl ? Steve

Breakfast at prcac is ready

Looking good Paul, Quick question couldn't' tell if it is a 4ch or not :?: It will be good to see that one up in the air. :) What Size prop you going to use I Like the color May need these if yo...

For the addicted Fliers who need a fix of a few Flights Today i will be heading down shortly. Conditions are not the best with wind around but it may settle a little, though it looks better than yes...

You may be right that its the Prop thats loud but i have found that using in runners for pusher seems to be quieter than the scorpion out runner, Tested motor without prop and and it tends to have res...

Yesterday Afternoon Steve :)

See you guys Tommorow if Weather holds out. I Reckon the Weather may scare some off But we May be lucky :smilie: Steve :)

Rc Large Scale Jets In Quakers hill Today. https://www.hawkesburygazette.com.au/story/6217253/replica-jet-show-set-to-run-for-charity/

Drew Wrote: (23-05-2011, 05:40 PM) -- Woo Hoo!!!! I just got the third axis (Y) of my CNC connected and they all seem to move in a sensible pattern. I'm going to try and draw a spiral tonight (brow...

Hi I'm Mr Panther, I'm Lonely and looking for a new Home Too and i'm new in the box great for Xmas Present under the Tree. ;) P.s Don't forget my Friend Mr A-10, his in here too, in the for sale se...

Lol very Funny, Wayne your looking Good. Steve

I cannot believe there was not one crash with so many up there flying. unless they edited the crashes !

srl Wrote: (17-07-2012, 07:06 PM) -- I only have this. -- Verry Nice :)

Driving past Today between Jobs, Thought check out the field condition. Pics below, surprising not too bad still very soggy in some areas where it was flooded but was an easy not muddy walk to flight ...

Nice Collection There Adam, Remember to harass the Instructors for your Bronze wings. Steve :)

Hi Guys Just thought I'd mention that i will be down field tomorrow arvo if the wind dies down if any else has arvo off and wants to fly. Will post before heading down though. Though i Think the w...

It's been a while since my last soldering of an xt60 connector, i understand they put xt90 on these new high discharge batteries for the current, but my EDF Stryker only draws 150 amps at full throttl...

Manage to get down field This late morning and gave it a somewhat of a haircut with the old faithful hand pusher mower to half of cross strip and to a patch of dry area on main strip. Not sure how m...

To Be Honest i was there Tuesday and the conditions did not improve when i saw it Wednesday and then we had a little Rain on Thursday so really the conditions i dont Think have changed. Which means th...

For Sale Brand New In Box DF-032 Panther Combo Set brand new in box. This combo included Panther Plane, brushless motor, ducted fan unit, 2X micro servos, servo extension cord and launching pad...

Ebay site cheap motor i'm running in island hopper RC 2600KV Outrunner Brushless Motor plane A2208 5013 with 6x4 prop motor link http://cgi.ebay.com.au/RC-2600KV-Outrunner-Brushless-Motor-plane-A220...

That's Turning out to be one Fine Looking Plane Mick. :thumbup: But Captain, Will She Fly. Steve :)

Wow Superfast Delivery From This Supplier, Ordered Saturday Afternoon got Mon Afternoon :D Pictures Below Of Plane, Plenty of room for Lipo, Looks Good All round. Steve :)

Yeh, Its a Little of Mucking around with the servos, and i was going to do it this way and looked up on web and saw a few differnt ways of doing it and this was one way that had been done. The other ...

Will be down Tommorow with With war wounds From Soccer Semi Final Game That i played Tonight. Lol i survived Thredbo But In pain After soccer. Will Bring Down Funjets for Con and John and a Spare ...

Thinking of heading down myself this morning for a couple of hours

Some Toys were Waiting at Post office for me :) http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=15534 http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=1623...

I will be out and about Tommorow so i will try and do a pic update of Field and its condition. That being said it really needs a mow if it is in ok condition for the weekend. Steve :)

My 2 cents worth, I use 5 min Epoxy and have been for everything, but i tend to do little sections at a time as it cures in 5 min, But That works for me and strength wise its been fine. Where i need ...

Still no joy Tried nearly everything ,did notice that it still has the models stored so reseting doesn't seem to work or i haven't done it properly. Just got back flying at the oval next door to me to...

George, Jitters could mean numerous Faults and rx Blinking or powering off. One Faulty Servo can cause the rx to blink and shut off or jitter all servos when control input is given. I have had this...

I told my Off Sider that i was going to land the Glider right at his feet. He Didn't Believe me LOL :lol: :lol: Great place, so open to Fly . I Remember the sneak approach Next Time :lol:

Been Down To The Field This Morning for an Hour, There is a Few people done Enjoying the conditions. The Field is in Good Condition and the Rain has not affected it all. Hoping to get some more fl...

I had a Chance this afternoon for a speed test on The Pogo I did a speed Test with Pivot Tube setup above Running 80 ESC, Eflite 1250kv, 8x8 APC prop, 2250 4s lipo 40c Horizontal speed 162 kph ...