robair Wrote: (14-11-2011, 12:51 PM) -- Gday Mr Barnesy Yep I will be there on the 16th, I have been looking forward to this since about 10 secs after I switched the mike off last year. ... need ...

kizza42 Wrote: (29-11-2011, 10:15 PM) -- Anyone need anything from modelflight? -- If its not two late I been meaning to get 2x AR6210 and 1x AR6115 Rxs.

kizza42 Wrote: (02-08-2010, 11:21 PM) -- Anyone keen on a Avalon road trip next year ;) -- I will be there. In the past went by air as a day trip but this time would like to visit Point Cook museum...

It was a great show, my favorite was the FA18 going at 500kt, 250 feet directly above (really directly over head) the crowd (and me), and the noise you felt in your chest. This time the RAAF got up...

Well it's been and gone. Bit windy but no rain. Had some fun with a new camera. Kevin And Gazz with their new PC9 model

yarrumevets Wrote: (21-11-2011, 01:25 AM) -- Not bad Kev - four Trojans as well! -- There was another one all by it's lonesome. There are quite a few more shots, in the end I ran out of battery cha...

Hi Chris, It's always great when you find that perfect photo taking position. I spent the first two hours standing under the wing of the Connie and out of the sun. Any chance you got some good shot...

[quote="kizza42"]These beauties are awesome to fly, paintwork commenced today on mine: Wings will be done in the same colour. Looks great, is that colour Red or Bright Orange, unfortunately my monit...

kizza42 Wrote: -- Its supposed to be cherry red but yeah, the grey foam and dodgy job from me have dulled it a bit. -- is there a primer coat or undercoat under the cherry red?

I need an outrunner motor for my Funcub build. Max thrust required would be 1100gms off a 3s battery. All the Hobbyking motors are on back order. Can anyone suggest an alternative manufacturer/dis...

kizza42 Wrote: (14-05-2011, 01:23 AM) -- The suggestion was either produce an aircraft to do the required maneuver or wait until changes are made to the wings structure (Of which there is no guarante...

Nice little write up on spins here: http://en.wikipedia.org/wiki/Spin_(flight) An advantage of foam is the low cost and quick repair. If we do build a club plane it would be a good idea to have sp...

The next indoor flying meet is on Wednesday, 3 April, 7.00 pm at: Hills Adventist College Auditorium Cnr Hezlett and Gum Nut Close Kellyville Cost to fly is $10, free to watch.

BOB Wrote: (25-03-2013, 02:27 PM) -- Hi Kevin. I looked up the address on Google map, and all that is there is a vacant land, Is this building being built recently?. -- All brand new, I think it ju...

Its on tonight, Wednesday, at Kellyville. Sorry for the late notice. See previous posts for address details.

Yes, sorry for the late posting but I only received the notification on the day.

Indoor flying this Wednesday, 5 June, 7.00pm ish at Hills Adventist College, 2-4 Gumnut Close (cnr Hezlett), Kellyville. Great venue, if you are new to indoor flying just turn up for a look. Remem...

Reminder, this Wednesday: Indoor flying this Wednesday, 5 June, 7.00pm ish at Hills Adventist College, 2-4 Gumnut Close (cnr Hezlett), Kellyville. Great venue, if you are new to indoor flying j...

Just a reminder that indoor flying is scheduled for Wednesday, 3 July, at Hills Adventist College, Cnr Gumnut Close and Hezlett Road, Kellyville. 7 pm ish to 10 pm. Remember the weather is always ...

A reminder that indoor flying is scheduled for tonight, Wednesday, 7 July, at Hills Adventist College, Cnr Gumnut Close and Hezlett Road, Kellyville. 7 pm ish to 10 pm. Remember the weather is alw...

Just a reminder that indoor flying is scheduled for Wednesday, 2 Oct, at Hills Adventist College, Cnr Gumnut Close and Hezlett Road, Kellyville. 7 pm ish to 10 pm. Remember the weather is always...

srl Wrote: (02-10-2013, 07:41 AM) -- Might bring the Tiger Moth, something different. Are you back Kev? srl -- Yep, I'm back, did 3 airshows and several museums of note. Even got to see a Airbus 3...

Indoor flying in 2014 is on this Wednesday 8th Jan at Hills Adventist College Auditorium, Cnr Hezlett and Gum Nut Close, Kellyville. Start time 7pm. The weather report says that wind speed with be ...

Greetings Funsters Indoor Flying is on again this week, Wednesday, 5 February. The times given to the Flying Funsters is from 7.30 to 10.30 pm – to allow the Basket Ball people to have an extra ...

Indoor Flying this Wednesday 5 March. Greetings Funsters Indoor Flying is on again this week, Wednesday. The times given to the Flying Funsters is from 7.30 to 10.30 pm – to allow the Basket...

Not asked for. Its indoors and as I undestand it the School has insurance cover.

Indoor Flying this Wednesday 2 April. Greetings Funsters Indoor Flying is on again this week, Wednesday. The times given to the Flying Funsters is from 7.30 to 10.30 pm – to allow the Baske...

Cameron Airshow, some really wild flying. www.youtube.com/embed/Bu535PZzysE

http://www.msn.com/en-au/video/viral/jetpack-pilot-flies-in-aerobatic-formation/vp-BBgHUi3?ocid=LENDHP

Just checked out your Group Order thread Kieran, looks good. You are spending a lot of your time on our orders (and we do appreciate it) and I was wonder what automation could be done to lessen the lo...

Hi Kieran, Since people are ordering carbon rod I've added a few to my order as well. I've noticed my list is getting a bit big and includes a couple of planes. I've deleted the planes, I'll get the...

Just noticed HK Aus warehouse has some 2200 3S lipos and I need a couple. Is anyone doing a local order or interested in adding to a local order to use up that 7kg postage allowance If I end up doing ...

samste Wrote: (17-01-2011, 11:45 PM) -- Looks Like a Great Beginner Trainer Plane, and at a great price it may be a good buy when and if it goes to aussie warehouse. -- before u buy check out the f...

Congratulations to the Engineer and Pilot on a great maiden and I have the photos to prove. (I rather liked the one of the plane in the air - minus one wheel). The other great photo is after the fligh...

Nice report Steve. New planes are aways a hassle until all the trimming is sorted, then they become sweet. What i really want to know is how you get your cats to pose so well in your photos?

Hi, My Easystar is ready for its first flight this weekend but I'm worried about the length of the leads from the esc to the brushless motor. Its a pusher and the leads are about 300mm long. Does a...

Thanks for the replys, been busy at work and did't have time to reply. re the wire size the wire gauge out of the esc (30amp) is much larger than the wire size that comes as part of the motor so I gu...

~KevJ~ Wrote: -- thats a great idea kev. I was running realflight g4 from a laptop onto a 100 inch screen at home initially.its how i became comfortable with mode 1 orientation! -- Standing in front...

Anybody have experience glue the magnets in an outrunner motor? I just noticed a couple othe magnets in the motor of my Clound Fly were starting to work their way out the case. Kevin B

The prop assembly on my Prkzone P51 has come of the motor shaft. Can't seem to work out how to remove the prop from the collet. Does anyone know how to get the prop off the collet? thanks, Kev B

Frank, Here is a useful site: http://batteryuniversity.com/learn/ the interesting bits have to do with how you prolong the life of the Lipo (battery temperature) and understanding the ratings.

Good pressure control and dry air are important, I think I still have the pressure regulator and filter I used years ago and you are welcome to those. Learning to use soft and hard masks is also impor...

Any body interested in mid week flying this week. I was hoping (weather permitting) in getting an early start, say 7.30am or 8am, but staying only for an hour or so (have to go to work! ). Servo

paulj Wrote: -- Hi Kevin, but don't forget that weather permitting a bunch of us are going down to the field around 4:30 Thursday afternoon. Just hope the wind has gone by then. Paul -- Thanks for t...

samste Wrote: -- Hi Kevin I may be up for the early morning fly tomorrow will post u early morning yes/no weather permitting also. If the weather is like what this morning was it will be great flyin...

7am Thursday: Mr wind :evil: tooo gusty for my EasyStar so it looks like I'll have to wait until Friday for another chance to fly. Kevin B

chancol Wrote: -- If anyone will be at the field tomorrow (Friday), please let me know. It is my day off. But if I don't have a reply by 8:30am, I'll make alternative plan. Colin -- If the wind is ...

The wind is a bit too gusty at my place, I'm off from work today so will check again in an hour. Kevin

Went flying this morning (Tuesday) at 8am, just a hint of wind to start with but had to stop by 9am as the wind got a bit too much for a beginner. Anyway this Friday have a late start at work so was ...

kizza42 Wrote: -- 8am as long as your plane isn't too angry sounding. -- My plane purrs like a pussy cat, you must be confusing me with those power mad pilots I've heard about....