Your doing it wrong ;) All the info you could ever want about the camera: http://www.chucklohr.com/808/

There is a .8 in the calculation to give some safey net ;) To find average, just enter the cruise amp draw!

I was bored last night so I came up with a rough spread sheet to give you rough idea of flight times using a certain capacity battery and a known amp draw. Have fun

I have all my servo throws in the radio at 100% and all my linkages are set up for maximum throw. Expo is about 60% on Ail & Ele but I always use linear rudders (0%) Be careful when setting servo th...

G'day Folks, I will be down Tomorrow and Sunday but only for short periods.

Yeah, I kinda miscalculated, try to aim for 40gb if you want everything ;)

No alarms for Dual rates, I don't know any radios that do that. I just always default my switches as off or away from me and its now the first thing I do when I pick up any radio... 2nd nature.

Ok, so I have a stack of Aircraft documentaries downloaded. If you'd like them you need to lend me your usb hdd larger than 16gb! Who doesn't have one these days !?

Did you have a look at the voltage regulator while you had the back off?

General consensus is that the voltage regulator is up to the task of 12+ volts. Some units have come with regulators rated for 20 and some people have modded there's to have better regulators. I woul...

Ahem... http://www.the-vellas.com/files/TopGun.mp3

Here is a graphic representation of how the HobbyKing shipping system is working at the moment :paranoid: http://content.ytmnd.com/content/e/0/3/e035a08e616468d1b0500bc12dcc11e9.gif http://content.yt...

I'm downloading all the eps again. 7gb worth. Will be done on monday.

Lol, I had that whole series, Guess I should have kept it ;)

He still does ;)

Gary, sit tight, A certain used but good airframe could turn up in the next week or so ;)

Oh they are real bitches to work with!! The little hole should be access to one or two grub screws holding the impeller to the motor shaft, once that's off you can attack it from the front for the res...

Definitely should be screwed on to the fan shroud, shaft pokes through and the impeller locks on to that.

Looking good, Kev, I think there is now a common denominator with mid-air collisions and its not me!!! :tongue_smile::tongue_smile::tongue_smile:

Not flying on Monday! (Today) Too much misery from the game, afraid I'll crash some more planes in sympathy!

I totally forgot that I left the post locked! Probably for the better with the way things are, lipo delays and dodgy exchange rate. I've pushed through a quick order of outstanding items that just c...

Rain Rain Go Away.... Its obvious that we wont be flying much this weekend, but if it does clear up I wont be around anyway, Going away for my sisters 21st!

I still would go with a Delta setup for the tailerons and mix in the ailerons separate.

Got what was probably one of the last Wifi + 3G 16Gb models left in Sydney, had to drive to Alexandria to get it! My initial thoughts were that it has a nice weight to it due to the glass front, its h...

...picked her up this arvo! Club signups this year may be very very digital ;)

Put it this way, HK made every effort to sell Horizon Hobby products, made significant changes to the way their website/business operated by adding facilities to hide volumes sold and having Minimum A...

G'day, The field is too waterlogged for cars at the moment so the gate will be shut on Saturday, Members are still allowed to use the field at their own discretion but must hike in! I wont be down ...

Bruce over at www.rcmodelreviews.com is going to review them. If anyone can provide a decent unbiased and scientifically backed review, its him. Secondary to that, unless they are extremely fundamenta...

Just testing the new auto youtube code... http://www.youtube.com/watch?v=-_hNAQYjNno it even does MP3s! http://www.the-vellas.com/files/SongofRuth.mp3

No longer are will we be subject to the price gouge, Cloned DSM2 receivers are now on the market. FASST is next!!! http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11965

Happy Birthday mate!

Originally posted by Paul just before I cut over to the new forum software: Here is some footage shot yesterday at the field. Gary's nice new Alpha Jet [youtube]http://www.youtube.com/watch?v=I...

Very nice! So Its defecting back to the CCCP after first defecting to the USA?

Could possibly be a timing issue, Will need to have a look/listen at the field

Panspermian Wrote: -- How far does the Aussie dollar have to drop before Hobbyking is no longer a cheap option? Things aren't looking good. I certainly won't do a personal order till things start lo...

Its more the devil you know, I know I can make an approach from out there and pretty much nail it every time. I've managed east west landings before but not without spoilers and a STIFF headwind. The ...

Heartbreaking but ultimately a good move! Could'a Should'a Would'a is unpleasant! You missed out today man! Siren was behaving strangely & climbing under full power, thought it was odd but put it do...

Things that can cause a chattering servo: -Flight pack voltage either high or low -EMR on the Servo wire, recheck/reroute the connections. -Try another channel on the RX, see if it does it on the old ...

My MY! Whatever do we have here!?

Sorry Kev, they haven't arrived yet. Track em here: http://app3.hongkongpost.com/CGI/mt/e_d ... 45669444HK (http://app3.hongkongpost.com/CGI/mt/e_detail.jsp?mail_type=ems_out&tracknbr=EA045669444HK&lo...

Just thought I'd chuck up these pics of the obscene amount of lead going into Darren's Sopwith! That box above the motor is a large lead block and also keep in mind that the cowl has lead lining it al...

Whoops! You probably have to log out and back in.

COMBAT TIME!!!! http://www.hobbyking.com/hobbyking/stor ... duct=11306 (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=11306)

Oh wow, That looks absolutley awesome! Wifey thinks so too! I know who I have to commission to paint my other funjet when I build it!

Still pushing them for info, will let you know as soon as I get any. If its any consolation the other order with everyone's stuff is still waiting to be packed as well!

I'm liking his Acrostar BD-5J. It satisfies a few of my (steep) requirements for an EDF :ugeek:

I was just looking at that site myself! Take your pick of material: http://www.rcgroups.com/forums/showpost ... ostcount=3 (http://www.rcgroups.com/forums/showpost.php?p=11384063&postcount=3) Keep i...

Gary, I have the wheels for the P51 but they are useless for our strip, they'll do more damage than not having them.

Unfortunatley its a part they don't sell, I have a stick mount that will do in its place. you just glue in some 1cm square balsa stick and mount the motor to it.

Not if you're using an AR6110, we'll do a mix in the radio.