samste Wrote: (10-05-2011, 05:26 PM) -- I Guess motors would be hard to stock as theres so many different ones. Steve :) -- Stuart has always stocked Hacker motors and batteries. I always got the...

Keep the bullet connectors on the batteries!! It is also easy to obtain (or make) a charger lead with bullet connectors also. That is what I use. The Gaui 550 was originally designed to use 2 x 2600m...

Servo Wrote: (04-05-2011, 07:46 PM) -- For those who want to check on the Council's status of fields there is a phone line 9294 8586 with a recorded message that is updated at 3pm each day. Curren...

(Sorry, thread hijack...) So how many of the fixed wing flyers out there are mode 2? I know BrotherBlonde is mode 2. Andrew takes off from the deck though. I recall Mick (Kedumba) is mode 2 as well b...

samste Wrote: (04-05-2011, 07:37 PM) -- Heads Up, Flying This Saturday Only But Flying on Sunday, well i do like Living. Unless However i get the OK but then that could be a Trick in Testing me u...

yarrumevets Wrote: (04-05-2011, 04:38 PM) -- At about the 40-second mark, Mr Dahl says that it's "big, beefy and indestructable". Hmm - reckon there'd be a few of us at PRCAC who would be able to se...

That's why I learned to fly planes on Mode 1 and perhaps why Mode 1 is so popular. Can't launch the plane right handed unless the left hand can control elevator. I switched to Mode 2 to fly helicopte...

Hot off the press. The new Logo XXtreme is coming (no, I am not going to get one). It is probably the biggest RC heli someone can buy. This heli is "800" size to put things in to perspective. There i...

Have never seen such an adaptor. It sounds like you will need to change the connectors so they are both JST male/female pairs. You will need to use soldering iron and heat shrink tubing. Be careful to...

Good to see a few flyers down today enjoying some sun. Bumped in to Gazz who was inspecting the field but did not bring any planes. He was hoping to catch up with Steve M who arrived 20 minutes after ...

If the rain hasn't been heavy through the night, I might check out the field around 9am also. It might be ok for flying helis.

yarrumevets Wrote: (29-04-2011, 07:48 PM) -- Yes Dave - it is odd, but it's happened to us before. Essentially, we got a notice (I think PaulJ received it) which indicated that McCoy park was closed...

Quote: -- wouldn't be surprised if we were given another notice of ground closure by the council. -- That seems odd. It's not like a soccer field where the studs would rip up the turf and damage t...

yarrumevets Wrote: (29-04-2011, 07:21 PM) -- Well, most fixed-wing aircraft aren't going to be compatible with our field this weekend. -- Good point there Steve. I can't see the weather being kind ...

This is what the view could be like if Darren was to lose his new Go Pro Hero HD video.. and if I were to find it.. and Darren didn't know. If he found out, that would be a different video. http://...

gbanger Wrote: (26-04-2011, 09:16 AM) -- Jeez your keen Dave. Willy weather has it raining pretty much non stop if you look at the Radar. Like Steve said, Good day for building. -- Didn't look at...

Not sure what happened there. Web site was unreachable for about 30 mins. It seems the rain has eased and if it stays away, I was going to load up the helicopters and check out the field around 9am...

A brave call early but if not raining tomorrow morning, I am going down to the field around 8-8.30am. I'll be up much earlier to check out the weather conditions... like many of us. I will post again ...

6.40am and it seems the rain might cancel the day's plans. The weather forecast seems to have been reversed. Showers all day. Bummer.

Planning on being at the field between 8.30am & 9.00am

Hi guys, Thought I would break with tradition and start a new thread for reporting on any day's flying rather than post on the end of the "flying this week" or "flying this weekend" threads. [hr] We...

This morning looks ok. Some rain perhaps this arvo but not in the morning according to the weather info. Monday and Tuesday looking windy. I an planning on getting there 9-9.30am. Will walk in.

gbanger Wrote: (23-04-2011, 06:41 PM) -- Thats great Dave I was a little suspicious when you said it was probably the Align Servos fault... I thought yeh right! Glad the beast is sorted. Hope to b...

24 hours later ... the problem was revealed. It seems the DS620 servo, whilst not the calibre of a Futaba BLS251 rudder servo, was actually not the offender. Looking over the mechanics this mor...

Andee Wrote: (23-04-2011, 09:47 AM) -- If I pitch the rotors (with t.hold on) it looks as if the pitch of one blade is more than the pitch on the other. -- Missed this in your post Andee. This is un...

You have definitely bent, at least, the feathering shaft (the shaft between the two main rotor grips). They don't survive tip strikes like the one you had. I'd also suggest the main shaft is bent too....

Well done Wayne. I am sure you are chuffed. By my maths, I reckon by Christmas you will have 40+ planes! :D Dave

The good news: Well, it turns out that the violent wag is coming from the rudder servo and not a set-up issue as such. Athough the servo used is designed for exactly that, a heli rudder servo, it seem...

dingy Wrote: (21-04-2011, 09:50 AM) -- What about the RTTOC. (Ready to Take Off Club) bugger. Sitting in behind the barrier waiting for Colin!!! to land & he still hits me! Sure does live up to hi...

Hi Gary, I will come down. Don't have fuel for the mower so I will have to stop at a servo on the way. Hopefully a servo open that early on Good Friday. I will try and get there around 7am as well. ...

robair Wrote: (21-04-2011, 06:20 PM) -- Thanks for the field reports. I was not sure what to charge up batteries for, big stuff, little stuff, stuff with wheels, without wheels etc etc. Cheers ...

gbanger Wrote: (21-04-2011, 05:19 PM) -- Hey Steve or anybody else that can give a field update. I am thinking about coming down early tomorrow morning to give the strip a mow if it is still to sodd...

yarrumevets Wrote: (18-04-2011, 09:16 PM) -- One problem that I've noticed is that when I open up the files for editing with Phoenix Creator, the panorama view and the collision objects are both kind...

Your sister's graduation and it's your birthday today. Don't expect you will be reading these posts today somehow as it is big day out I'd suspect :leet:

I'll be flying this weekend. Hope the field dries out so we can all get together. Regardless, it wont stop the heli boys!

Dropped in to the PRCAC field around 1.30pm. No-one there and the conditions were pretty good for flying the helis (apart from the gusting southerly). Did a pre-flight check after all the adjustments...

dingy Wrote: (16-04-2011, 08:34 PM) -- Thanks Guys, All I can say is "Bugger" - was looking forward to fine weather having fixed the Cub & the Twinstarr II. Just have to wait for next weekend, ...

I haven't seen the field but expect it has water over the runways (enough to stop the planes). Could be a "helicopter only" day if the rain backs off. Too bad the plane guys have the keys :D (joke)......

Flying fisho Wrote: (16-04-2011, 06:40 PM) -- Thanks guys, will discuss more at length in person if anybody flies tomorrow. BOM says 40% chance of showers tomorrow. Dont know how field stood up today...

Flying fisho Wrote: (16-04-2011, 06:18 PM) -- On the subject of new planes, visited Hobbies in the Hills today, just to see what was there. -- A mere shell of their former selves. Not sure what hap...

gbanger Wrote: (15-04-2011, 10:03 PM) -- I will be opening up at 8 am if the weather is kind. Gazzzzaaaaaaaaaaaaaaaaaaaa -- Planning on being there too at similar time - also pending the weather...

I might be taking my own thread slightly off track but anyway, enjoy the video. http://www.youtube.com/watch?v=Hn3Qm5fI_Ms

Well, some hunting around on the net paid dividends. Found in a forum that a person with the exact same heli had similar issues with heli lurching on spool up. Seems his problem turned out to be...

Bring it down next weekend for sure mate. I am planning to be there both days. I built and flew a HK450 as my first heli and basically learned to fly on that. It was the first heli in my fleet of 3 t...

robair Wrote: (10-04-2011, 07:37 PM) -- Personally I am gobsmacked and that's only after seeing it static and a brief run up! WOW :thumbup::thumbup::thumbup::thumbup::thumbup: Cheers Rob B -- Rob.....

Well guys, no maiden today due to "issues". Let's call it an engine run-up test and declare it extremely successful (just quietly, I was surprised with how much power this machine has. Holy cr*p Batma...

That's gold!

We are getting a few new helicopters flyers in to the club which is great. For the newbies I thought I would try and compile some places (on the web) of interest that I have used in progressing throug...

gbanger Wrote: (08-04-2011, 10:33 PM) -- Hey Dave As you would expect I have a library or high quality servo extensions. I have 150mm, 300mm, 450mm and 600mm JR quality leads. I will bring a 300 an...

Netball season has started and I am designated driver/spectator tomorrow morning. Sunday is a go'er. If I get some servo extension leads 30cm x 1 and 50cm x 1 then there is a chance the Logo 600 could...