Search Results
Hi guys good report as usual Dave.
I see some of you are looking at the 50mm edf planes now.
Don't know if you are aware but Mark at Extreme RC in Melbourne is also
selling them. Here is is webpage.
h...
35,478
That's exactly the reason I have been getting you and other to throw my
stang, especially when you upgrade the motor like I have.
I've been carefully watching just what throttle setting I should use ...
35,478
Steve I have successfully under hand launched the stang
when it was stock standard.
As Gary says, it's all in the throttle position.
My problems with the mustang are all related to upgrading the
motor...
35,478
Yea Arron what telescope do you have?
I have a Celestron SCT 8 which I have had since early 1980's
Converted it to computer control a few years ago but I haven't used it for awhile.
Used to be a membe...
36,334
UHU Creativ for styrafoam is another option.
Spotlight sell it at around $10 a tube.
Be careful but because there are other types of Creativ for wood etc.
Drying time is approx the same as UHU Por.
P...
36,864
Hi Drew
What thickness do you have spare?
Also how much per sheet?
Paul
36,864
Hi Drew,
Can I have a couple of 6mm sheets if you have enough?
I'm ok for 3mm.
thanks
36,864
Thanks mate
I'll fix you up when I see you.
36,864
Not sure yet. Will work out how much material I need for the Bandit and
see what I have here.
If I have enough I will let this order go.
I'll know by tomorrow night and let you know then.
36,864
I'll take another
3 x 6mm White Depron
thanks
36,864
Likewise Drew just let me know how much and I'll get it for you
36,864
Thanks Mate, unfortunately I won't be down the field on Saturday to fly
but if you are down there can you please give me a call (0404543567)
and I'll pop down and fix you up.
Otherwise whenever you a...
36,864
No worries mate. Just when it comes is fine
Sorry it has caused you a bit of hassle.
36,864
You must have good eyes George.
How could you tell it was an FMS catalogue?
38,879
Hi Drew,
I'll take 3 sheets of the 2mm Depron from you
if you have enough spare.
Going to use them to skin an Airliner.
Paul
40,907
I've just received my next plane kit today.
This is going to be a build progress thread were I will post photos of various
stages of construction.
The aircraft is a F14 Tomcat (TopGun) swing wing figh...
41,166
Thanks Kieran,
It just so happens that I've got a spare Turnigy 2835-2200Kv Inrunner here
as I took it off of the old Electrafun XP.
Also got some spare esc and plenty of HXT 900 servos.
I will need a...
41,166
Thanks Rob will have a chat when next we me.
I'll make sure I photo document the swing wing feature as I'm pretty sure
you would be able to incorporate it into an F111.
This build is a "Leap of faith...
41,166
Ok everyone, to wet your appetite so to speak here is a short youtube
video of the finished model. Note that it incorporates some footage of the real thing
just in case you can't tell the difference ;...
41,166
Hijack ok this time. :)
Don't know about Phantom....(might be my next plane).. :D
Seriously no problems but I'm sure if I can do it so can you especially after
the awesome job you did on the EasySpo...
41,166
Ok, small change of plans.
As there are some depron working techniques I need to practice,I've decided to
not start this build for a couple of weeks.
I have an F16 needing some TLC so follow my progre...
41,166
And so it begins............................
Started cutting out the depron parts.
Lots of parts all cut out.
Construction starts tomorrow. :D
Can't wait to fly this baby.
Originally a pusher jet...
41,166
Going 90mm fan or even 70mm would require too much
modification to the airframe which I don't want to do as this
plane flies so well as designed (so the various websites reckon anyway).
The conversion...
41,166
Building progressing. :)
Here is some photos of the early stages of construction of the
forward fuselage section
Floor in place
Nose blocks glued in place
Nose blocks sanded to approx shape
...
41,166
Ok the plot thickens.................
First a little history about this model.
Originally designed in 2005 as a pusher jet by Steve Shumate
in USA. He published his plans for anyone who wanted to buy ...
41,166
I have made a decision. :D :D :D :D :D :D
I'm staying with a pusher prop model.
After long discussion with my financial advisor(wife) she
advises that I have sufficient funds to purchase a ARF...
41,166
Just want to mention that build has slowed down
for the moment as I want to get the Gunfighter back
together and able to fly on weekend.
Soon as this is done I'll get back to this.
Paul
41,166
At long last I'm back working on this project.
Delay took a bit longer than anticipated.:)
Anyway have now completed the engine intakes and
attached them to fusalage,also installed motor mount at...
41,166
Couldn't help myself...:)
I just had to quickly put the parts together to give you
an idea of how she will look.
Sorry about blurry picture but this is just a quick pic to
see the parts tha...
41,166
Finally ..
I'm at the painting stage of the F14.
Stand by for some photos of finished article later this week. :)
Maybe I'll get a short video of the swing wing function too.
41,166
I know I said that I would have some photos this week
but I ended up being sidetracked by a faulty swing wing servo
and had to buy one from lhs so painting was on hold.
Anyway I did mount the motor a...
41,166
Ok Folks at long last she is finished. :D
Here are some photos of my latest pride and joy.
Mavrick and Goose in the cockpit
41,166
Thanks guys, I'm hoping that she flies as good as she looks.
Just weighed her and with a 2200mah 3S battery and all electronics
she weighs in at 1150grms. Going on the readings I obtained with the wat...
41,166
Thanks for the offer Andrew,but I think I'II wait until after
Temora. :)
Just a bit of background info, the plane is painted in the colours
of VF143 Squadron "Pukin Dogs". It was based on the US Carri...
41,166
Not really all it says is to mix in some elevator up trim when wings
sweep back. Approx 5% is the recommendation.
41,166
Well she flies..................:)
Had a hard time keeping it in the picture.
Also couple of adjustments needed ie. different prop and 1 of the servos needs
securing but overall the concensus was that...
41,166
LOL..........Good one Kieran. :)
Yes Steve, we only made the one flight on Sunday.
Kev(my test pilot), was under instructions to just fly it with
wings extended while we trimed her out.
We cut short t...
41,166
LOL...
You heard correctly,what you didn't hear was the
100 other times I told him what I wanted even before we got
to the field.
Got to keep these test jockeys in check otherwise they try to
almost d...
41,166
LOL Good one Rob.
Think I need that software too,
My wife has some funny looking eyes each time I mention
buying another plane.
Paul
41,166
Sorry traveling overseas at the moment and just saw this post.
There is an American company called 6mmRC who used to produce a kit by approval of
The designer Steve Shumate.
Not sure if they still ...
41,166
Yea me too have had good and bad service.
Last order I paid for express post for an item that
was suppost to be in stock and it took them over a week to ship.
Still came express post but a week just t...
44,137
I nearly bought this when I was up in Brisbane but
decided against it as I too have a few things in the pipeline.
However, I have been looking at some plans for a scratchbuilt
C17 Globemaster which I ...
44,137
with maybe an escort of mustangs for protection....:)
45,193
Looking great Buddy.
Any news on missing items?
45,193
Looking good.
By the look of the progress you've made I better
get my finger out and get cracking on the scale cockpit and radio room
areas.
45,193
Looking good Darren.
I better get my finger out when I get back from Brissy
and get started on the cockpit and radio bay.
45,193
Looks great Darren.
45,193
The wing itself is probably heavier than the heaviest plane we have
flying at our club at the moment.
45,193
Yea afraid so.
Darren will probably do some taxi tests etc at McCoy but
think he will have to go to Blacktown or somewhere to fly it. :(
45,193
Don't forget the tail guns....
45,193