As Kieran said To me earlier Im an Eflite Junkie :D Have swapped out Tonight the Turnigy 1100kv for the Eflite Power 25 1250kv that came from the US Today. Motor Test with - APC 8x8 Prop Efli...

Yes its Common https://www.paypal.com/webapps/mpp/security/report-problem

Hi Guys Was wondering if any one had a couple spare bullet connectors for my new 6s Lipo's that came in, If not i May change them over to XT Connectors. Photo Below with bullet style connector. ...

I,m Curious if anyone is flying Tommorow as the aWeather is so unpredictable it appears it may be a good day Tommorow. I guess will see in the Morning Prcac ? Area 51 ?

Paul you will Love the 90mm 12 blade edf, Just came back from a maiden and cannot stop Smiling and that was on 4s. It Sounds so Good and so much Thrust :thumbup: I reckon 5s Setup on yours will be...

I going to be heading down soon to McCoy just need to put some planes in and breaky, Big change of weather from Yesterday Steve

Thanks Kev yeah will maiden a few times before rebuild Found that the ART-TECH JETIGER is exactly the same as the hobby king version so downloaded the Artech model manual and found Centerer of Gravi...

wingtipper Wrote: (11-03-2013, 07:39 PM) -- YEP . KING OF EDF . will be watching here . -- LOL, I Just Love Fast sweet sounding Machines. Three Coats In and One More to go then 24 Hours of Good...

Not Bad, Gives a good approx Time with some reserve allowance. I guess its Hard to really make something for all situations as Lipos Have so much variance with Total Actual Capacity, C Rating, Actua...

Pterodactyl Ornithopter EPP Composite 1300mm Green pnf version Hooking Up the Sound Module to your tx and rx I found that the plug and play version the sound module will not work unless your using t...

Ill be Down Early as well 7 ish Steve :)

See you all down There Tommrow for some Fun Flying, Fingers Crossed for excellent Weather Too Steve :)

corsair_pilot Wrote: (07-03-2012, 07:19 PM) -- I would love to have something like that. I would love to have a Corsair that big one day, and then have an F4 Phantom as well... could be a nice little...

The Weather Forecast appears to favour Sunday rather than Tommorow, But i will see What it is Like in the morning and will Post, Possibly if Wind is Gone it will be a Good day. Possibly a Pemac Visit ...

Hi All Yes Kev i do too love the Paint Job, Very Envious. It actually looks really good painted all over, Will have too do that on the next Funjet Frame i setup. Steve :)

Heading down this morning

paulj Wrote: (25-06-2010, 09:30 PM) -- Very Nice Steve. Did you buy from efliterc direct or some dealer? Just wondering on postage charges Paul -- From Atomic where i get the Stryker Frames From...

Ive got a wet and dry vac thats good for sucking up water and fluids, Take care mate and get better soon as i might need a buddyand buddy lead when i take my plane up for a fly. :):):):)

Looks Nice Gary , Colour Scheme Great. Looks Like Its A big Scale version 1400mm ? Steve :)

With All this Talk of The Parkzone T28 Trojan Flying Characteristics so much better without Wheels. I thought This Afternoon when i got home to spend a couple of hours Doing something about it. Stil...

I am heading Down Now with Mower for a Mow of Strip and Taking some planes down for a Fly Afterwards. Steve :)

Rare Bear New Colour Scheme Steve :)

Its good to hear Paul the gunfighter is up in the air again and flying nicely. Great job putting it together so quick and in great flying condition again . As it was quite impressive when it was flyin...

No Power just Rx Control of Flight Control surfaces and must be able to be catapulted (possibly Jason Catapult) Size restrictions, weight restrictions posibly below http://www.hobbyking.com/hob...

Bearer of Bad News of Field condition 8am Up to Date Pictures from the Ducks First hand , and there not even game to go swim in the Rain. Steve :(

Yep well i was planning a day of Flying but i knew they got the weather right and the Rains came. :61_61::66_66:

Heh Ingo If You are Concerned about Using Lipo in DX7 Use This Little Unit. http://www.aprohobbies.com/lipo-stepdown-voltage-regulator-radio-transmitter-jrspektrum-p-263.html I been Using eve...

Hoping to get down this weekend for a fly but have a lot of kids catch up games and a skip to fill at home so will see how i go. Possibly afternoon visits may work. Steve :)

Flying Tommorow at Field Not Sure of Conditions ? But am going to Head Down if its Not raining and hand Launching Steve Reminder Kev Post on Indoor http://forum.rcflyingclub.com/showthread.php...

Jason I thought the One i ordered is Telemetry compatible ? i just wanted to install it inside and use existing position of Antenna position rather than one sticking out from back. Plus i love solder...

Hi Guys looks like i may be down early tomorrow but got to leave by 9am So early risers if weathers good i will post in morning ye or ne like i did for my early flight this morning. Steve :D

wingtipper Wrote: (30-10-2012, 05:55 PM) -- yep ill try that Steve . it's only EPS though i think , will break if you look at it the wrong way . -- Heh The Panther you got Does look Nice, I Like ...

Look What came in The Mail Today From The US Auctions $132au Delivered. PARKZONE PNP TYPHOON 2 3D They are selling for about $159us plus Delivery on some Us hobby Sites. Steve :)

srl Wrote: (01-01-2014, 04:33 PM) -- Another good day of flying with mates to start the year. srl -- I agree, It was a Good Day :)

Not sure of the Field Condition or weather for a Fly Tommorow, But It would be Nice To have a Fly. Will see what the weather will bring In The morning. Steve ;)

gbanger Wrote: (18-07-2011, 06:29 PM) -- That looks pretty smart Steve, whats the maximum amp draw (recommended of course) on the motor, I'm curious, why didn't you go for another Scorpion? My broth...

secant0give Wrote: (26-01-2012, 03:31 PM) -- All ready to go now, cowl on last of the struts fitted. Radio set up Ready for a test flight. Certainly has enough power to taxy along the work shop floo...

smuzz Wrote: (27-04-2012, 06:00 PM) -- No worries Chris, it's no big deal - I've only managed to get the runway and the taxi-way done (sorry heli-dudes). I'm a bit disappointed because I was hoping i...

Hi Rob Here are the specs on that Motor, i bought That motor off Ebay. http://cgi.ebay.com/Emax-2215-20-1200kv-Brushless-Outrunner-Motor-59g-2-1oz_W0QQitemZ110366464154QQcmdZViewItemQQptZRadio_Contro...

So if the weather is Good Tommorow, which is hard to tell at the moment. Who is thinking of coming down for a Fly ? I was thinking of doing a mini sausage sizzle bbq if there is a few coming down. ...

Yes very nice I actually came across this site when i was looking for the Panther and the site i bought the Panther had also the BD 5J http://www.keimod.com/shop/index.php?cP ... 6c5caa929b (http://w...

Now This is a Quad ;) http://www.youtube.com/watch?v=SNPJMk2fgJU&feature=player_embedded

Very Nice Drew, Nice Build. I Think I may Get a bundle of Depron Sheet sizes next Time a Order Is Done. I Enjoy Building Myself. Steve :)

samste Wrote: (06-10-2019, 10:40 AM) -- Rossy Wrote: (05-10-2019, 11:12 PM) -- samste Wrote: (04-10-2019, 07:50 PM) -- So Whos Flying This Weekend,  Saturday ?  Sunday ? -- Sunday.. -- Today is s...

Yeah i Reckon That should be Fine 1100kv. No Repair, it was my Old stryker Frame setup that was warped anyway as on high speed it would pull badly to one side, thats why i have my glasses speedster...

yep, Some Mothers Do Have'm

secant0give Wrote: (23-04-2012, 10:51 PM) -- Some video of Vineyard field from the air taken on saturday http://www.youtube.com/watch?v=BS1IZKb0b9Q -- Great Clip Jason , i didn't realise that th...

Hi All Mick if you decide to buy a Hopper they do fly stock quite well not much power though, i can help you or anyone else thinking of purchasing a Hopper to set it up to fly and i do have some some...

Hobbyking Meteor (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=20401) or Rebel 70 (http://www.wiredrc.com.au/shop/electric-planes/erc-rebel-70-sport-arf.html) or Hobbyking sport ...

That looks Good Colin, Hopefully it shouldn't affect flight Characteristics as its may or may not cause extra drag on underbelly of plane, Though I'm not an Expert in this field, Thats why i chose cut...