25-03-2012, 06:50 PM
(25-03-2012, 05:39 PM)gbanger Wrote: Hey Steve
When you mounted the fan on the back of the Stryker did you angle it down and to the right or up and to the left?
Gazz i played around with it on the prototype at different angles, and where Talking millimetres changes on my old frame stryker to i got it Right
and then i measured it exactly so when i fitted it to my new Stryker Setup it was the same.
So its hard to really be sure if its slightly more or less to right/left up/down as the Frame is angle itself where the mount is and design of Frame makes a difference etc.
I think you need to adjust it for each frame Type Gazz, I know what Ya Thinking, Skyfun Funjet edf setup.
I do have an old battered Frame in roof from my front prop setup failure that i could possibly test it out on one day
(25-03-2012, 09:33 AM)robair Wrote: G'day Steve
I too thank you for the esc review/ advice.
I have been considering esc's for the viper and sabre so your post is very timely.
The k forces must be bloody good to survive the samste electrical lunacy.
BTW your 90mm fanned Stryker is waaaaaay cool, nice work there mate.
Cheers
Rob B
Thanks Rob, Had a lot of Fun with It Today at the Blacktown Fly in, Speed Passes and Boomerangs, Sounds Good Too.
Steve
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down