16-01-2011, 07:25 PM
That's right Kieran,
This has occurred using 36Mhz to me, BUT I was lead to believe that 2.4Ghz the motor nothing should work - hence being able to use multiple planes at once without the worry of interferance.
That was another reason I have change to 2.4Ghz from 36Mhz.
The Tansmitter should ONLY lock into the designated receiver which it has been binded to.
I would check the receiver / transmitter to make sure that this was an isolated case - sounds like something is not right.
Sorry about the plane - as they say no pain no gain!
This has occurred using 36Mhz to me, BUT I was lead to believe that 2.4Ghz the motor nothing should work - hence being able to use multiple planes at once without the worry of interferance.
That was another reason I have change to 2.4Ghz from 36Mhz.
The Tansmitter should ONLY lock into the designated receiver which it has been binded to.
I would check the receiver / transmitter to make sure that this was an isolated case - sounds like something is not right.
Sorry about the plane - as they say no pain no gain!
HobbyZone - SuperCub x 2
Parkzone -T-28D Trojan
Guanli - Cessna 182 / F4U Coursair
Multiplex - Twinstarr ll
Electrafun XP - Back from the dead - It flies
In the Hanger waiting Build
Guanli - ME 109 / Zero / P47 / F4U Cousair / T-109 / Spitfire / P47
Skyartec - Funjet x 2
Beaver - Balsa
Decathlon – Balsa - Big
The World Models - 40" Clipped Wing Cub Sunburst Red
In the Hanger Repair Shop
Guanli - P47 / Spitfire / Cub 3 Channel Modified / Skylark Glider
JR XP662 – 36MHz Radio – Mode 1
DX7 2.4GHz Mode 1