09-01-2012, 03:58 PM
Hey pal! Back of with the condasending Gaz like expletives or you'll get some real Gaz expletives.
I think you will find that the location of the endpoints for the gear are quite critical.
They are run by one big servos and if you are not carful with the positioning of the end points you will either have the servo rip the airframe to pieces or not have them set in the lock position. I know this because I torn the servo tray out while doing the original setup.
Glad to see the mighty Airwolf in the sky.
I think you will find that the location of the endpoints for the gear are quite critical.
They are run by one big servos and if you are not carful with the positioning of the end points you will either have the servo rip the airframe to pieces or not have them set in the lock position. I know this because I torn the servo tray out while doing the original setup.
Glad to see the mighty Airwolf in the sky.
Parkzone Stryker 27 Evolution
E flite Ultra Stick , T 28 Carbon Z
Skyartec Skyfun Scorpion,Skyfun 90 EDF
Hobbyking Voltigeur, Funfighter T28, Mirage 2000, Minimoa 2.4m Glider
Jet Teng L-39 HPAT Stumax 90
Pheonix Tiger 50
FliteWork Extra 300 LPX 2.6M
Spectrum DX9i , DX6
Don't ever let the fear of landing keep you from taking off!