10-07-2012, 06:04 PM
George is spot on there Steve. The sliding arm on one side of the front retract get connected to a normal STEEL clevis. dont use plastic they will fail from the sliding and rubbing.
Here is a pics of the front wheel in my big Trojan using Eflite retracts with the same type of linkage, just make sure you have it adjusted correctly for both the up and down positions before secuing the servo to prevent structural damage that can be caused by the servo over strocking the limits of the retract arm.
Here is a pics of the front wheel in my big Trojan using Eflite retracts with the same type of linkage, just make sure you have it adjusted correctly for both the up and down positions before secuing the servo to prevent structural damage that can be caused by the servo over strocking the limits of the retract arm.
Parkzone Stryker 27 Evolution
E flite Ultra Stick , T 28 Carbon Z
Skyartec Skyfun Scorpion,Skyfun 90 EDF
Hobbyking Voltigeur, Funfighter T28, Mirage 2000, Minimoa 2.4m Glider
Jet Teng L-39 HPAT Stumax 90
Pheonix Tiger 50
FliteWork Extra 300 LPX 2.6M
Spectrum DX9i , DX6
Don't ever let the fear of landing keep you from taking off!