18-09-2009, 07:40 PM
Quick update, received programable battery monitor Today.
Quite a nice unit though i noticed it buzzers if lipo exceeds 4.2 volts per cell when connected and stops when goes below.
I think this could be handy when charging batteries with an indication if batteries are being over charged ?
Stock Esc in Trojan has a cut off at 9.2 volts or 74% of battery whichever is higher as per manual.
Thus programming battery monitor would be set at 3.2v per cell (9.6v) giving ample time for safe landing when buzzer sounds.
Steve
Quite a nice unit though i noticed it buzzers if lipo exceeds 4.2 volts per cell when connected and stops when goes below.
I think this could be handy when charging batteries with an indication if batteries are being over charged ?
Stock Esc in Trojan has a cut off at 9.2 volts or 74% of battery whichever is higher as per manual.
Thus programming battery monitor would be set at 3.2v per cell (9.6v) giving ample time for safe landing when buzzer sounds.
Steve
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down
![Tongue_smile Tongue_smile](https://forum.rcflyingclub.com/images/smilies/tongue_smile.gif)