Closed.

No problems Robbo - see you then.

OK Robbo - sorry about the delay, here's our flight report of one that my son and I had a few years back ... http://forum.rcflyingclub.com/showthread.php?tid=239&pid=4046#pid4046 (we originally got ...

No problems Robbo - I'll get some photographs of them tomorrow and post back here. If you like the look of them, I can bring them over to the field on the weekend if you're going to be there. Cheers...

Well, fellow enthusiasts, I've got to move house soon and I'll have to down-size at the same time, so quite a few of my planes won't be going with me. I've got several planes, mostly new kits still...

OK mate - all yours! Cheers, Steve

SOLD! I don't want to do this, but it has to happen. A brand new FMS 1400mm P-51D in the "Gunfighter" livery. I've mostly assembled it, but there is still an hour or two's work required to co...

Just as with the other one, I've got one of these brand new in box and I'm never going to get to build it. RRP is $130+ but it's yours for $80 if you wish. It's expensive compared to a HK model, but...

I've got one of these, brand new in box and I'm never going to get to build it. RRP is $130+ but it's yours for $80 if you wish. It's expensive compared to a HK model, but I prefer knowing that it's...

Excellent - the timing is great as I'll be heading out to the gym about then. Thanks mate, and see you later!

Sorry Rob - been out all day. What about tomorrow (Tuesday) evening some time?

Omg, I've gotta take that Sabre from you Rob! Give me the nod and I'll follow up with another EFT. Cheers, Steve

I'll take the Twinstar, Rob - I remember Kizza doing the maiden on it. Yep, $60 is a great deal - let me know what arrangements would suit you best. Cheers, Steve

I don't think so, Peter - not the v3 Trojan anyway. I ended up getting the red/orange and white USN version from Philip Worshop. I asked about the grey scheme at the time but I think he indicated th...

You're a good sport George! :thumbup:

George - John was kind enough to drop it off at my place on his way to work this morning. As he stated, it's not quite "museum quality" as it is, and wouldn't be suitable as a raffle prize, unfortuna...

Beautiful looking model John - I'd love to use it as a raffle prize to raise money for Westmead Children's Hospital ... I've sent you a text message. Cheers, Steve

Thanks mate - alright, a special price for you, $60 ;)

Same story here - was originally set aside for Junior, but it's now surplus to requirements. Wattage PC-9 - small model, 955mm wingspan with a plastic fuse and built-up wings. Airframe only again ...

Guanli Mirage 2000 - airframe only kit. I got two of these a while back so that Junior and I could fly 'em together but he got tired of waiting for me to catch up and left the sport, so it's yours for...

Thanks for that Banger - I'll email the seller and see if he's willing to post (... too bad he's in Brisbane). Cheers!

Panspermian Wrote: (21-02-2013, 06:25 PM) -- I would like a spitfire but I don't know the brand, pictures don't look like it's too nice a model and it looks like an old kit. -- The Spitfire is a "G...

Yes Kev - I'll be there for sure! Looking forward to getting some backup from you on the three EDF machines we saw at Temora - I've been talking about them, but I'm sure most of the guys think I'm exa...

No worries Paul - tomorrow morning at that time is fine. I'm emailing you now!

Yep - no worries at all, Paul. I'll be at home this evening (any time after about 7:00pm) and I'll be working from home tomorrow all day too. Let me know what time suits you best and I'll have everyt...

All yours PJ! I've remembered that I have a few little bits and pieces left over from one I hit the lines with too, so I'll put those in a bag and you might as well have them also. Let me know what...

Wattage Harvard (AT-6 Texan) - Airframe only kit Also untouched in box, these aren't being sold any more. This one isn't a foamy - built-up wings and covered in solarfilm or something similar. Th...

For a proper 4-channel plane, ready to go, $100 would be more like it - depending on the brand of receiver, ESC and servos already installed. Yes, some picture frame wire or even a cable-tie on the l...

Well, that's interesting. I'm quite sure there aren't any more Blu-Baby's of that type lying around but there might be some Eflite Apprentices or similar amongst the membership which are surplus to ...

Ben - it was good to meet you today and thanks again for the beer ... it is working as advertised as I type :-) Here is the type of motor I'd recommend for the Blu-Baby ... http://www.hobbyking.com/h...

Correction Victor - you don't owe me anything, by my calculations! See you tomorrow.

Certainly, your calculations are spot-on. I usually lob in at the crack of 10:00am or thereabouts.

No problems mate - the advice flows continually from every orifice, so there'll be plenty of that. Once it's airworthy again, I'll get my son to give you a couple of Buddy-lessons free of charge if y...

Yes Ben - it's still available and the price hasn't changed ... although it's getting closer to Friday and I'm getting thirsty.

Thanks Jason! Junior and I had a few laughs putting it together :)

My old Blu-Baby is taking up valuable space and it's time for it to move on. I want to swap this for a six-pack of 500ml Oettinger cans. The plane was made by yours truly off a plan obtained from ...

Kieran -- Omuzz just metioned that he will indeed take the Multiplex Funjet, but he didn't have time to make this post himself, because he's heading out the door to go and earn the money to pay for it...

Exactly the same thing happened to me too, PJ, with the same outcome. Not only are they happily flogging pirated software, they can't even ensure they have the stolen materials actually at hand befor...

By the way Jonathan - I forgot to mention that the fridge should be stood upright and left for 8 hours for the refrigerant gases to settle before switching it on! This is because we transported the t...

Yes Steve - it's "fridge buying season"! I'm going to be constructing an aeromodelling shed out the back yard and it will have a beer fridge in it, but won't have room for the full-sized item - a smal...

Thanks Gazz and Pete - but it looks like Jonathan (Corsair_pilot) will take it. He emailed me earlier today and dropped by to check it over on his way home from work.

Had this for about 10 years, still works perfectly but it didn't fit in with the newly re-modelled kitchen. If you want it, it's yours - I'll only hang on to it until the end of the week though - aft...

Skidz Wrote: (07-11-2011, 05:33 PM) -- Who is the second dude to get the first shipment going? -- As much as I want to, I can't - they're a great model though, by all reports. Here's something to get...

I thought you might be interested Ingo - OK mate, no worries - they're yours.

Again, free to a good home ... 1 x Miniswift Wing 1 x Miniswift Tailplane (horizontal stabiliser) ... these are just the bare foam parts, no servos or other hardware. Would be useful if you ow...

... Nope, and they wonder why people hate them!

Kizza - yes, but I like to keep just one Windows machine only set up with Microsoft products. It's so that when I trash and disrespect MS to my students, I can be sure that I can safely state that Mi...

... and I've still got the Microsoft IE9 duplication problem - back to Linux then!

OK - no worries. We're aiming to get to the field tomorrow ... but it's anyone's guess with respect to the weather. Willy says 90% chance of 5-10mm and Weatherzone says 60% chance of 1-5mm. They're...

Very helpful to the complete beginner ... two E-Sky pretend 4-channel transmitters with a copy of FMS (a free RC flight simulator). Junior and I are having a clean-out. You can have both my mode...