I'm Just going over my CNC mill and my reading up tells me that I need one for better parallel port performance. I'm a Nvida Man. Doesn't mater how old it is. srl

I just bought a brand new fridge this afternoon. Properly like your new one Steve. So we have one to get rid of too, same one but not working too well. Ten years ago we raced at the Orange Club and m...

Also good for keeping the glue. I have a small toaster oven only ever used for post curing. Claudio will know what that is. srl

I have bought in bulk 6mm and 3mm for my indoor kits, so I'm happy to sell in small quantity's I'm keeping the price simple, 1000mm x 350mm, $10. 3 or 6 mm. Also 1000x700mm $20. Its pickup at Mccoy...

Hi all Three to cut out so far. I'll have them ready for the weekend. Servos are cheap and strong htx900's. A big prop 9 or 10x4 and a low kv motor work the best. 3 cell 1000 about right Jason? ...

Cut one out today, I'll do another two when I get back from flying tomorrow. Maybe this motor. http://www.hobbyking.com/hobbyking/store/__17445__NTM_Prop_Drive_Series_28_30A_750kv_140w_AUS_Wareho...

Hi Frank We usually go flying tomorrow morning at about 10am with Claudio and Angus, if can't make it and wish to collect it before the weekend give me a ring on 0408474045 tomorrow. I live 10 m...

I just found this thread for the Extra on RCGroups (http://www.rcgroups.com/forums/showthread.php?t=373243&highlight=extra+330+6mm). Its a lot of reading. srl

That's right $30 cut out on two sheets of 6mm Depron. I need to have a word with the marketing department as regards to the confusion. And all my kits are brand new unlike Kierans sale. Buy one o...

Just seen this on Hobby King. http://www.hobbyking.com/hobbyking/store/__9375__High_stength_fiber_tape_20mm_x_50mtr.html srl

No problem. I'm busy with church in the morning, I can call in about 12.30-1pm for a quick fly. I forgot to charge my TX and only got 1 fly this morning. It was quite busy. srl SRLFoamies.com

Glad your enjoying it Frank. The Idea for me to cut them out is really Jasons. I have one ready the same as Frank's. Just give me a call Arron on 0408474045. Same price $30. I also have some (...

Sorry I forgot the important bit. 10mm The plane is made from the same sheet. It used to go to the big Hstore indoors so it has a few bites out of it. srl

I have one cut out. With carbon spar and push rod material. $35. I'm now working so I can bring it to the flying field on the weekend. I can always cut more if anyone is interested. srl

Wrapped and ready. You can contact me before 8pm any night on 0408474045. srl

This is airframe only as the factory ESC/ Motor is very expensive and still OK. The motor box needs repairing. So a HK conversion is the way to go. HTX 900's will fit perfectly. Less wheel pants $4...

Just getting this thread going again. The good news is that hobby king now have carbon fiber at the Aust warehouse. Bad news is that the 6mm strip is on back order. http://www.hobbyking.com/hobbyking...

I've put together a list of Hobby king gear for the 6mm Depron Extra build here- http://srlfoamies.com/?cat=32 Any thing I need to add? srl

I've started building my second Extra and the 6x1 carbon spar works well and is very light. I will put a HK order in to get some more. srl

I've been busy today cutting Extras and flying. I will bring two more down tomorrow Sunday lunch time if anyone is interested. Price is $35 for depron sheets and carbon strips-rod. srl

I've just got in a new box of 6mm Depron to satisfy the recent demand for the Batix Extra. The build thread is here- http://www.rcgroups.com/forums/showthread.php?t=373243 The price for cut Depron an...

Just like the real thing its reached its end of life. It has no structural repairs its just after 200+ cycles the servos and 1 retract are worn out. So good for parts. No RX. $20 ONO srl

I've been asked about single 6mm Depron sheets. The size is 100x70 cm. $20 each. I also have foam board 1016 x 815mm $20 Pick up can be Winston Hills or Mccoy any day this week . srl

Yes $30 for the cut Depron and a carbon spar. srl

Hi all. I'm after a DX6i but it must have DSMx that has been available for the last five years. Market price is about $100, a old very used one went on ebay this morning. There was a good one for $1...

Free or best offer Two Taranis standard sticks still in the empty case shell unused. The ones that ware out with a lot of use. Yes I now own a Taranis with M9 gimbals . Doesn't feel as good...

I have 2 hack boards for sale with DM9 cases. $60 each All the info here- http://johnprikkel.blogspot.com.au/2014/07/jr-dsmx.html (http://johnprikkel.blogspot.com.au/2014/07/jr-dsmx.html) To fini...

Will see you at the indoor Andrew. I'll bring some double sided tape if you want to install it. srl

HI James I just got back from a few flights. I've got a AR6100 you can have for free. If Dirk's offer is DSMX it will be a better match for your TX(cool factor). The htx900's will be fine. Later ...

Sorry Rob I had one doing nothing too so I gave it to James. srl

Part of my moving sale. $100 with 2 batteries. Will be flying at Mccoy Wednesdays and Saturdays. srl

Sorry Bob. Now only $56 on HobbyKing. srl

$180 20 months old with the nice sticks and non slip grips. The date resets so then the data logging will not work. Everything else is fine. It has the latest opentx. srl

I'm back using it again so sale has ended. 7 and 9's are the best value in FRSky. Thanks srl

Hi Danesh Buying from the US just cost too much. For leaning to fly and flying at our field would you consider this - https://www.banggood.com/Cloud-Dancer-1300mm-Wingspan-Trainer-Balsa-Laser-Cut-RC...

Hi Rob Two repairs going on here from last Saturday. The ARM had a U/C mount give way from a crash and repair done last year. The Katana didn't pull out of a spin quick enough. Pilot error !!.

All done Drew despite the wind , good work. srl

To Kevin Here is the link to the CNC plan. http://www.instructables.com/id/How-to- ... aply-and- (http://www.instructables.com/id/How-to-Make-a-Three-Axis-CNC-Machine-Cheaply-and-/) And here is my m...

Hi Kieran Sorry its 2s400 and still overpowered!! 2Cells are only $6 total. all HK stuff and lots of fun. http://www.hobbyking.com/hobbyking/stor ... _Outrunner (http://www.hobbyking.com/hobbyking/s...

Hi Drew Here is a link for the depron. http://www.depron-australia.com (http://www.depron-australia.com/) Glue here: http://www.hobbyking.com/hobbyking/stor ... ue_(Medium) I would use 6mm for out...

And here it is. Already two flights as Drew said, The tail wheel came loose loose on the first flight and is already fixed for good. Its 6 cell 2200. Dinner is being called bye. Stephen

We are racing at Pittown on the 30th. All electric aircraft are welcome in Q500 sport. Ten laps is 100mph in less than 2 minutes. F400 and F3d go a bit faster. Practice is on Saturday. Cost is $25 wh...

Had a great time last Sunday flying Q500/sport. Had to give this guy a hand. srl

Hi Rob Weather cleared just for practice afternoon and race day. It was good to get my hands oily again. Got every round in myself and came 4th. Calendar here:- http://nswpylon.org/calendar.html srl

Here's the latest guys. will be flying at the Strathfeild Indoor this Thursday. Its so cold outside ! Its great flying weather but the LIPo's are not working good in it. I re wired the ar6300 dire...

We are welcoming any electric aircraft to race in sport (Q500). All the info here:- www.nswpylon.org And disscusion here:- http://www.rcgroups.com/forums/showthread.php?t=1270263 srl

A great afternoon of flying today with the wind down at last. I also had some 6 cell fun with the Extra MX. You can never have too much power Drew. srl

This weekend we are at a private farm with sealed strip at Marulan. Its a MAS event so feel free to look, help or have a fly in the electric trial. Details and precise directions at nswpylon.org , ...

Out here we race like this next weekend. http://www.youtube.com/watch?v=GAexxcN3jj0 More info at www.NSWpylon.org srl

Electric and glo racing at Pittown this weekend. All welcome to have a look , help or race. Details nswpylon.org srl