Hi guys. Here is a you tube video on the DC3 been upgraded to use gas turbine engines really amazing this version will allow these planes to fly for many more years. https://www.youtube.com/watch?...

Hi Simon. Looks like a fairly good machine for the price. To break an arm the machine must be going at a pretty good speed?, Looking at the photographs the arms look quite solid ?, According to the ba...

Hi guys. Well to say I’m annoyed underline is probably an understatement I’ve received an email this morning from HobbyKing with a few specials amongst them was motors for my new drone they were half ...

Hi everybody. Have a look at this hobbywing ESC Opto type they come in 10A/20A/40A the plugs from the motor plug straight into the end of the ESC instead of having a lot of extra wire that you got a g...

Hi everybody. Below is 3 quad that I’m interested in I would appreciate any input thanking you in advance. 1 Quanum Falcon Billet Block FPV Racing Frame Like this one very much I think it’s a kn...

HI, Simon. I thank you very much for the tip of follow-up CC3D Revolution, Mr. Painless 360 that guy is quite good I have quite a few of his videos that I’ve downloaded from you tube and they are very...

Hi,John.Would it be possible to give me their webpage link so I can download the software to have a look at it thanking you in advance. Bob.

Hi,John.Would it be possible to give me their webpage link so I can download the software to have a look at it thanking you in advance. Bob.

Hi everybody. When I was buying the quad I bought a sky zone TS832 600W 32 channels transmitter four $87.58. From HK Webpage below. Recently I was looking on banggood website and came across TS83...

HI, John. The problem with CC3D is the software there not updating it and the revolution what is the successor to CC3D controller is not been released they will not licence a manufacturer at all CC3D ...

Hi, Jason. I’m interested in your assessment of the CC3D control board, I’d like to put one into a cheap 250 quad at some stage in the future.

Hi, Rob. I’m also thinking about getting orange module for my TARANIS because I have several orange and spectrum receiver’s and it would be a total waste not to use them.

HI, Andre. You should talk to Peter he’s also done a bit gliding and like you he said the best results were around at the ramp.

Hi, Simon. I’m are beginning to come round to your way of thinking but had the guy used nylon bolts instead of metal ones in he may avoided that problem?. I did is some research on HK website but ...

Hi, Simon. Cam across a you tube video of a guy building Diatone #37 250 quad link to below video boards the end, as he was testing the motors the whole unit erupted in smoke after carrying out a exa...

Hi guys. I wanted to start a discussion about which 250 quad frame is the best??.The frame where the arms are all in one such as on QAV 250 all. Or with the ZMR250 that has arms will bolted on not sur...

I guys. Is anybody came across a small plastic container with sums screwdrivers I can’t find them and I’m a bit concerned in a left accidentally at the field some anybody comes across it with the plea...

Hi, guys. I want to wish everybody a merry Christmas and a very prosperous New Year.

Hi guys I’ve got two questions about the Quanum V2. One. Working out which lends is best for you?, One of the chaps on you tube suggested that you only put the unit together with wire tyres or even...

Hi guys. Here is the ultimate christmas gift?, It is an upmarket version of Quanum V2 called Headplay below is some YouTube video links all reports say the video image is spectacular?, The problem is...

HI, Rob. I also purchased my Tarranis from them as well and had no problems whatsoever even run the guy on 1800 number to asked couple questions no problems.

13/11 Hi everybody. This afternoon the with had a very heavy thunderstorm in Toongabbie so I’m guessing the field is heavily waterlogged at least.

Hi guys. Here is the you tube about new Quadrysteria QR 200 racing quad. As I’ve stated in the past this guy always makes really good multi-rotors. Below is a couple a you tube videos. Home Page http...

Hi everybody. Battery elimination circuits or BEC. It is something I think all of us should have knowledge about, my understanding was a bit limiting so I went on to you tube and collected a couple of...

HI guys. Is the new quad from flight test. Is striking resemble to the V3 black member, below is a link to their website showing the model including a fairly long video. Kind regards, Bob. DIY R...

Hi everybody. Have a look at this YouTube video, could be the ultimate use of a quad?. Regards, Bob. Building a rope bridge with flying machines https://www.youtube.com/watch?v=CCDIuZUfETc

Hi guys. Called in to the field on the way to Bunnings this morning, lot of water laying on field much more than normal only models flying would be quads. Regards, Bob.

Hi guys. Here is a YouTube video of DC-10 firefighting tanker aircraft, be amazing. Regards, Bob. Most Amazing Pilot DC-10 Tanker 911 at the Powerhouse Wildfire Fire https://www.youtube.com/w...

Hi Jason and Kieran . I’m investigating the idea of upgrading my radio old but very burnable DX7 to a FR SKY Taranis dx9D plus that way I can use all the features on the controller on my new quad onl...

Hi Jason and guys. What about a slalom course similar to what skiers have each pilot could take turns in flying through the slalom course with a stopwatch on them?. Regards, Bob.

Hi Jason. Below is a link to you tube video eight altogether explaining how the fall Naze32 works, this fellow has made a whole bunch of videos covering lots of subjects in the RC hobby the videos a...

Hi, everybody. This is a short description of several of the control boards that you can use in multi rotor machines. 1, OpenPilot NANO. The Revolution nano board is a successor to CC3D board liste...

Hi, everybody. Here is a you tube video of antenna tracker looks nifty but about the price I bet it’s pricey to?. Hi Jason, than immersionRC duoV4 that you are using on Saturday really does work ...

Hi everybody. Here is a you tube video of Daniel flying model from a moving car, Daniel’s girlfriend Quinn was driving the car, quite a bit of spectacular FPV video but a little bit long ?. Regards, ...

Hi, Jason and Simon. I found to other aerials on a HobbyKing not sure what they’re like but links are below. Simon question not sure how to attach aerials to my sky zone RC700D yet guess I work it out...

Hi, Simon. The sky zone 700D, and he worked out which aerials your fit on your sky zone700D?, I’m about to order some stuff from HobbyKing Hong Kong I had a look at several of the ones adjacent recomm...

Hi John. Very interesting I’d certainly like to see that. You know how to program CC3D board?, There are a couple of really good you tube videos explaining how did do it the only problem I had with un...

Hi John. Both Revo/Nano are meant to be available I think ???, Below is some websites that I visited none of them seem to be selling the actual Revo/Nano. This is one of the problems with open pilot n...

Hi Jason. That’s the Australian store that has been closed for several weeks, however the American store is running webpage below, just visited it and it looks like most of the stock is out of stock?,...

Hi everybody. I’ve decided to start a post about my favourite control board open pilot the benefits of our members and also visitors. OpenPilot is a next-generation Open Source UAV autopilot created...

Hi Kieran. You better check with your bank manager first made, I’ve had a look on the coupler YouTube videos and it is a really nice unit though fairly expensive my understanding it comes with everyth...

Hi, Simon. Start with thanks very much. I’ve yet to order the battery looking on the HobbyKing website Turnigy 2200 mAH 2S 20C lipo pack is the only one that will fit inside the battery monitor cas...

Hi, Simon. Yes please if you could solder a JST plug on one of these batteries I would be appreciated and of course meet any costs my soldering skills especially with battery terminals is not real goo...

Hi Jason. I think you might be right about the HKPilt versus Naze32, apparently the Naze32 fall version GPS hold doesn’t work very well there are problem with it operating attempting to correct the co...

Hi, Simon. On Sunday I was madly ordering parts from the US Hong Kong and still I have to order some more stuff yet, V3 black member kit apparently comes with a basic Naze32 not sure if I’ll replace i...

Hi Jason. The question about FPV. Do you use a filter to block RF?. I think I’ll get one of those transmitters as well. Kind regards, Bob.

Hi Jason. What size FPV transmitter are you using noticed a little break up at times, is that the course of the trees or size of the transmitter?. I in the process of ordering my new quad the V3 bl...

Hi, Stephen. Thanks for the post. This is a Quad that I’m thinking about buying, it has Afro ESC 20 AMP, motors sunny sky 980KV I wondering if it’s the best option percent off a couple of emails with ...

Hi guys. On the Quadrysteria website got a Power Distribution Lead for Quad (4 x 3.5mm to XT60?. Looking at the photographs the lead seems to be heavy-duty so my question is good enough to run a 220...

Hi guys. Is anybody dealt with banggood.com, The reason I’m asking HobbyKing, do not have sky-zone RC 700D in stock.?. Not sure where the company is located but they gave me the price for the Sky-zon...