Search Results
Gday KV
Blackhawk? You're joking right? From the scale of the wall it is leaning against + the people standing around it I would say that it is not more than 4 or 5m long, has very short high rpm ...
121,982
Gday KV
I am too seeing a lot of Blackhawk interpretations however it makes no sense. In the picture you posted there is a guy with his hand on one of the stubby little wings. A Blackhawks dimensio...
121,982
Gday All
Seeing as I am speculating my nuts off in another forum at the moment I must ask the question, why is HK now selling turbine FOD guards?
Could we see some budget turbines in the near futu...
208,699
Gday Claudius
Now that make a bit more sense, will re-scale using that philosophy, still feel the overall geometry does not support that.
Cheers
Rob B
121,982
That Banzuke is bloody funny. !!!!
Some good and bad flying efforts in there.
I'd be keen to try some Banzuke style commentary next time Andrew is down with his camera. :thumbup:
A KV hand launch w...
30,700
Top idea.
Because I fly like crap compared to Gazz I am a bit more of an "expert".
And have done quite a bit of building.... and... rebuilding.
Cheers
Rob B
23,807
Gday KV
I stand corrected.
You wanted "to believe". Now it seems you can.
Good Stuff.
Cheers
Rob B
121,982
Gday All
Hoping someone will be able to help me out with a TX issue. I mentioned in another post that I was having some probs keeping my heli's in a nice stable hover in the vertical sense. I have ...
694,878
Gday John/ Gazz
Thanks for the advice, I may have a shot at tightening the stick tension as suggested. I'll whip out the manual and see what is involved. Hopefully I can tension up just the throttl...
694,878
Gday Gazz
Yep, the determination is thumb only or thumb and index.
Might try the latter? I can test that out on the HK Pitss, if i pulverise it in the process it will fit into the category of who ...
694,878
Gday Graham
If it is any consolation, from memory Ingo and I had to cool our heels for a few months back when we joined the club.
It's just one of those things.
Cheers
Rob B
7,162
Gday KV
Can you elaborate? A spin is a simple and fundamental maneuver that any pilot must master. I am unsure where the confusion lies.
A true spin involves a reduction of airspeed to the point w...
151,569
Gday Steve
Any aircraft (fixed wing) will spin. If the aircraft enters the stall and descends wings level with a nose high attitude (mushing) the spin can be induced by aileron input to drop the wi...
151,569
Gday Dave
I can't interpret the gold wings requirement as needing the spin to be uncontrolled, whatever that means. However what you have described would be a real "tester" for sure.
Also, last...
151,569
Yep
:):thumbup:
Cheers
Rob B
151,569
Gday Steve
Sorry, I missed your earlier reply, to recover from the incipient spin it is stick forward to regain airspeed, however to recover from the actual spin it is opposite rudder to the directio...
151,569
Gday Steve
Yes will be down today for a bit, just cramming coffee into myself as we "speak". Can only stay untill 1030 or so, expect field arrival about 9'ish. Looking forward to it as I am sure th...
151,569
Gday Rob
Thought you had completely disappeared, still have to swap some cash for some batteries with you mate.
Cheers
Rob B
7,162
Gday Gazz
I have enough various balsa at home to potentially build the Kon-tiki Raft.
What do you need? I may have what you require.
Cheers
Rob B
694,878
G'day Gazz
I am up in bananaland at the moment when I get back to Syd I'll see if I have got what you need. May not have enough to do the whole job though in for that spec balsa.
Cheers
Rob b
694,878
Gday All
Hey KV, you don't seriously expect us to believe this comment do you? "I was just crusing slow, straight and level with the Stryker":lol:
Thanks for the heads up re fog and 2.4 though, I ...
2,852,516
G'day KV
Would you be able to post the details of where you got your folding prop from for the tt siren? John jellyV and I are interested in getting a couple for our gliders.
John, I was talking wit...
694,878
Gday Dave and kieran
Thanks for the info
I will liase with John and see what we come up with.
In regards to the soaring star I have made some major changes to the stock setup which I considered to ...
694,878
Gday Mick
I have been down a identical road with my Twinstar, Kieran's suggested parts list looks good stuff.
I am going to hold off posting the specific specs for the moment as Kieran is going to...
39,159
Gday Mick
I am assuming you have this all sorted however the twinstar runs on the following set up.
Each side runs a 2650 nanotech via turnigy plush 60 to a turnigy aerodrive xp 35-36 1400kv mot...
39,159
Gday Fellow Heli Heads
Just following up on the thread from the Airwolf "For Sale" forum.
The quality of the trex compared to the hk's is considerable and must make the point again that Gazz has...
121,982
G'day all
Toonie copped a massive amount of rain last night.
I think we are now in the territory of needing one of gazz's jet boats
Cheers
Rob b
1,362,175
G'day Stephen
Nice Stryker mods, 10*10 prop must be a tight fit. Seeing as the weather is so crap I was considering ruddering up my Stryker as today's project. Any hints for me there?
Cheers
R...
464,308
Happy Birthday Mr Murray.
You must be almost as old as Gazz now??
I forgot to thank you the other day for sharing memories of your participation in the Boer war. Thanks mate, was interesting stuff!
...
75,000
Gday Drew
Hope you are having a good pseudo b/day.
If anyone is planning to fly tomorrow you may wish to re-think, 50kmh winds forecast.
Cheers
Rob B
926,618
Ok Gazz thanks for that, will give her a nuking with my iron.
Cheers
Rob b
464,308
Gday Steve
You are a menace to motors. :D
I think its time you investigated micro turbines. :thumbup:
Cheers
Rob B
464,308
Gday All
This thread seems appropriate to notify of a project I have been working on. Reason being that the thread focus seems to be on frying things and/ or "irresponsible" amount of power.
I ...
464,308
Gday Steve
1100KV motor.
Bummer re the power lines mate, did you manage to land her ok or did she get trashed?
Cheers
Rob B
464,308
Gday All
Hoping I can get some tips here.
I have de-covered the TwinStar as phase one of her makeover.
As expected there are bits and pieces left behind all over the airframe, the outer clear cov...
464,308
Gday Andrew
I would call a baton drop as stating "resume own navigation" or "you are leaving my airspace"
Cheers
Rob b
30,700
Gday All
Count me in.
Now, who is going to put in the monstrous depron order?
Cheers
Rob B
40,296
Gday Gazz/ KV
As expected my iron needs a major cleaning however got most of the residual film off. From the pace I set yesterday I will be sanding most of today. :paranoid:
I am aiming for a ni...
464,308
Gday All
Some time ago i decided to get off my arse and source some folding props for my gliders. Kieran pointed me to a gentleman called Peter Pine who stocks Aero-naut gear. I emailed Peter with ...
106,786
G'day Chris
I have a 13*6.5 apc you are quite welcome to.
Cheers
Rob b
7,760
G'day Chris
No worries will do the above shortly
Cheers
Rob b
7,760
G'day Pete
I am having a chuckle that the first member out of the blocks in the depron challenge is building out of........signboard.
I must get started on my "depron dodo"
This design is optimised...
40,296
Gday All
Hope you had a good AGM, apologies I could not be there, I was seriously delayed flying back from Brisvegas so missed the show.
When I got home I decided to have a bit of heli practice in t...
121,982
Gday Gazz
I am still spun out as to what happened. Stay tuned, I would like to bounce some theories of the fellow club rotor heads. I am getting info together and I am going to try an suss out what...
121,982
G'day Dave
The blades in question were HK 3d composite jobs and had come from Darren so can't question their integrity from that perspective. Ran some calcs as per your equation and was well below ...
121,982
Gday John
Did you re-bind the receiver when you installed the satellite?
When I got my 1st sat, I noticed that on first fire up the main receiver got a solid light however the satellite flashed aw...
926,618
Awesome stuff, where did you find that gem?
Cheers
Rob b
8,946
Too cool
I thought the car wash was pretty average however I was SOLD when I found out it even had a sign. That stuff gave me a good laugh, all well and good except I am currently on a peak hour train...
8,946
Gday All
We had a pretty decent dump of rain early this morning at Toonie and it looks pretty shabby out there right now.
Likely the field has reverted back to semi swamp status?
Cheers
Rob B
1,362,175
Gday Drew
Helicopters don't require thrust per se by virtue of the fact that they are so ugly they repel the earth.
The above is also a fair explanation as to why only true "He Men" have the requi...
40,296