I believe you can connect peer to peer or run your own server

[youtube]http://www.youtube.com/watch?v=PUB4fpC7by8[/youtube] Its very hard to get into one with the T28 cos its so stable, you'll want to get very high and maybe have the battery a bit further back ...

2x http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=20571 1x http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=20684 Rob B: -$6.42

Ummm.... Says it all really ;)

All Better!!

Bahahahhaa, Great job with the drop hatch mate! Will be interesting to see how much drag it generates, you might want to limit its deployment to 30 or 40 degrees. The plane could literally fall out o...

Yeah, I should be home most of Tuesday evening, Just msn me :) Anyone else is welcome to come around during the week and grab your stuff if you need it asap.

I'll chuck some deans on them for ya and get em charged

Its looking good mate, why don't you get the nosewheel servo connected at least and do some ground thrust tests down at the field, if the current motor can sufficiently accelerate the airframe on the ...

Have fun at Temora, only a few weeks till I'm down there :) So who's flying when this weekend? The forecast looks promising, how many of you Fathers are we gonna see on Sunday ;)

Yeah, I think I'll no show on Sunday so will get there early saturday. Will target 8ish

Very nice! Gonna have to get me an airbrush

The shaft adapter is used when you are using the motor shaft, if you are bolting the prop to the other end then you don't need to worry about it ;) Leave all the ESC settings at default although you m...

Will be down tomorrow from 8ish, I believe Darren will be mowing. Cya there!!! Sunday is still tentative for me but I believe Chris will be down so the gate will be open.

These beauties are awesome to fly, paintwork commenced today on mine: Wings will be done in the same colour. Also plan to replace the wheels with something slightly larger

Its supposed to be cherry red but yeah, the grey foam and dodgy job from me have dulled it a bit.

Nah, this is just 2-3 coats straight over the stock grey foam. The paint was waterbased gloss enamel and Floetrol to help it through the airbrush, I think Darren also added some isocol to get it to go...

Great news Mick, You'll really enjoy it, Even if you don't find a plane this week, charge up your DX7 and bring it to the field, I'm sure there will be something to buddy you on ;)

Just a heads up that the new Sydney Wx radar is online!! This is great for us as its closer to the field and offers higher resolution images and doppler wind data!! You can find it here: http://www.bo...

04:42UTC is the time the frame was taken. In this case 4:42AM GMT or UK time. When you click on Doppler wind you will see colours which correspond to wind speeds down the bottom

Congrats and Happy Birthday dude, twas hard not to mention it over the last few weeks, especially when we had our "incident" ;)

All Finished!

Thanks, all credit to Darren who found the way to airbrush cheaply and showed me how! The stickers are the original ones, very carefully peeled off and put on wax paper, The trick is to reapply them j...

The crappest, cheapest nastiest stuff that you can find! Any good stuff will rip off the paint. Also insert paper or doubled over tape where you can, I basically just used the sticky parts on the lead...

By the way, T28's are IN stock at Kelletts right now, better hurry if you want one!

By the way, T28's are in stock right now at Kellett's. Tell Michael you are from Parramatta and he may do you a deal ;)

What diameter are the wheels :?:

50mm should be ok for the grass, Atleast you don't have to worry about prop strikes ;) Wether or not you rip them out will depend on how they're attached and at what angle you land... For EG. Nose in ...

Now you see why its good to get used to "severely" underpowered planes ;)

Looks good mate and don't worry we'll get you flying eventually!

Great Day Flying until my motor popped on the Decathlon, Along the way I seem to have forgot that the motor was only rated at 45amps for 30secs and I was propping for 55! :oops: But! Look What I F...

Yeah, I think we will have to make breakfast runs mandatory, I was feeling crud this arvo until I got some Macca's Coke into me ;) Good to hear about your Cessna Paul, You were flying it great up unt...

Soft cutoff ;) You'll know when its a Hard cut off! Guys you really should be setting timers for flight much shorter than your battery's capacity or they aren't gonna last long.

[youtube]http://www.youtube.com/watch?v=f4J5fz7Vy_I[/youtube]

Hmmmmm :ugeek: [youtube]http://www.youtube.com/watch?v=4sNgOGh-oKI[/youtube]

I reckon she will fly sweet Rob, The only thing I can stress is be ready to jump on the rudder as the torque kicks in and don't yank her off the deck too early, both are mistakes I made with my decath...

Like we've always said, Watch out for them power lines, They wont think twice about travelling a few hundred km's to attack your plane!!

G'day guys, Mobile data is very patchy so no photos I'm afraid. Weather down here was great today. There are about 100 jets down here so far with stacks more to come tomorrow! Constantly 5 planes in t...

G'day Folks, Back from Temora, I trust you all had a great weekend from the posts! The weekend was largely enjoyable, Maiden flight went very well on Friday: However on Saturday: :cry: Norm...

You can use the AR7000 in the island hopper until you get some more receivers. Just ditch the old receiver and plug the servo's into the AR7000 With the Spektrum model match system, You bind the rece...

Your radio only really supports 2 flight modes which means you only have one flap down stage setting. This is fine as you only need all or nothing. The servo's should be connected to Flap and Gear on ...

Carlingford? You Poor Fella! Forgot to add these before! Note the chin up and happy expression despite the misery* *May or not have to do with large amounts of Alcohol ;) By the way, let this be ...

Colin, Stephen has already got it for you, check your email so you can contact him

Meh, they're always a little on the pessimistic side ;) If its not blowing a gale, I'll probably be down around 8:00 8:30 getting the most of the still air until it DOES start blowing a gale

Yarr, Red sky in the the morning be a pirates warning! ;) Not going down early, I haven't heard that the meeting has changed as yet though so I'll be there at 10am

Hope you have a good time, Unfortunatley its a tad windy for my liking today. Oh well plenty of summer left ;)

Who uses WLM or MSN? Why not add fellow club members or add your address here for fellow club members to add you. Add your details in your profile or click on my profile to add me, look for this butto...

Yeah, later in the arvo is going to be best:

Fingers crossed guys! Might see you down there if I wake up early enough

~KevJ~ Wrote: -- ~KevJ~ Wrote: -- 9.5x7.5(standard t28) prop = 607 watts = 57 amps @ WOT as i was looking for endless vertical. :roll: -- found it :!: :D -- And then some!!!