Search Results
Thanks Steve, Looks like another building weekend then :(
1,378,786
I think if such notice comes from Council again it will
go to Kevin Barnes our secretary.
The last one actually went to John Considine who was our secretary
before Kevin.
I was just the bad bastard wh...
1,378,786
Just thought I would show off the latest
edition to my hanger.
It's a fibreglass fusealage with balsa wings
70mm Eflite model.
Same power setup as the Parkzone Habu
Don't think available in...
2,993
Is it for making a thrust tube?
If so, you try one of these
http://www.extremerc.com.au/estore/index.php?main_page=index&cPath=178_93
702,532
Hi Sujit,
I doubt if you would find any members here who use Tamiya plugs
on their batteries. They are more likely to be found on RC Cars.
Most of us use XT60 plugs (male/female) which we buy from
htt...
702,532
Hi guys good report as usual Dave.
I see some of you are looking at the 50mm edf planes now.
Don't know if you are aware but Mark at Extreme RC in Melbourne is also
selling them. Here is is webpage.
h...
35,567
Hi guys,
Just be careful if you do go flying on the weekend.
The slope down from the top gets very slipery after a lot
of rain. You would not be the first to get stuck down there when
you try to get b...
1,378,786
That's exactly the reason I have been getting you and other to throw my
stang, especially when you upgrade the motor like I have.
I've been carefully watching just what throttle setting I should use ...
35,567
Steve I have successfully under hand launched the stang
when it was stock standard.
As Gary says, it's all in the throttle position.
My problems with the mustang are all related to upgrading the
motor...
35,567
thanks steve, already got 1 on order to test :)
211,686
Well looks like the Saturday fliers had great weather today.
Hope you all enjoyed your flying.
I was planning on flying tomorrow but have decided that
I better do the right thing seeing it's Mother's ...
2,891,840
I'm planning on being there on Sunday and possibly Monday
too. Hope weather is fine.
2,891,840
Certainly we can put it on the agenda to discuss
at our next committee meeting but I fear that Gary
is correct, the chances of council agreeing to this request
are not great.
24,143
I would caution against hand launching if you can't take off from
ground, you just can't get enough airspeed over the flight surfaces.
Best way is to bungee launch if it is low on power.
Many a plane...
4,531
Kev is in Melbourne this weekend so I'm doing
the soccer dad duties with Ryan.:)
I won't be down Sat but hope to be down for awhile on Sunday
2,891,840
Well they have finally arrived.
Kev's and my new Stumax EDF's for our Temora Jets.
These babies will produce over 3000Watts 4.5Kg thrust
running on 8s batteries.
With that great "Turbine" like sound.
...
14,052
Couple of additional photos
showing size comparison with the DeltaV
Habu Fan/Motor combo.
14,052
So funny,
You guys seem to have all the fun on the days
I can't make it down.............:)
See you all in the morning.
632,883
Steve there is another way of mounting that motor
if you feel inclined.
Just push the shaft through to the other end of the motor
and you can then mount it directly onto the builtin plastic mount
of t...
5,013
I believe our idea is to use 2 x 4s batteries.
This way we can utalize existing batteries plus any future
ones that we may buy for our F86 and Sapac Hawk.
14,052
thanks for that advice Dave.
Pretty sure we will be real careful to keep the batteries
compatable.
As far as flying at our field is concerned, well as Kev says it's going
to be a matter of seeing how...
14,052
Like many of you I too will not be down over the
weekend either.
Taking the time to do some major re-organising of
my building area.
Wife has been on my back for awhile now to get the mess out of sig...
2,891,840
All the best Mate
Hope you have a good one.
76,110
Thanks will read closely.
702,532
Thanks for all the info guys.
I'm thinking of 2 differt setups.
First is my L39. I'll be using 2x4s (approx 10000mAh) batteries to power the
Stumax EDF.
Don't want to take any of that power and use f...
702,532
Hi Rob,
Yes like Kieran I meant to comment on your earlier post.
First off, thanks for investigating the venue your efforts are appreciated.
For the committee to discuss this it would be helpful if yo...
24,143
Steve is that photo showing the edf in it's final position in the fuselage?
Looks a long way from intake tube.
84,055
I think it will make a big difference.
If you left it as is the fan would not be as efficient, at least
that is what my research has showed up reading other edf discussions
on rcgroups etc.
84,055
Yea steve you will definately get a better quality with the high speed card.
Picture quality looked good when plane was stationery so this leads me to
think that it will be nice and sharp with the new...
632,883
Nice steve.
I will be doing something similar with the leds on my L39.
Are you planning on maiden this weekend?
84,055
Thought I would do a build thread to show everyone
how I go about rebuilding an old airframe.
This is my old Parkzone P51 which has seen better days and
after some very rough treatment I fibreglas...
3,718
Carefully peeled the glass off in sections.
The original paint from Parkzone was sanded off before it's first glassing.
The new paint(first repaint) has mostly come off with the glass but there are
st...
3,718
Not original scheme but haven't decided on what yet.
Want to see how the airframe come up after the work.
If it comes up good then maybe I'll go for this.
This will only be if I'm really happy ...
3,718
Shitty weather........................:(
Can't see us getting any flying unless it
improves dramaticly.
2,891,840
No mate it was another club(Penrith member) and it was stolen from
his garage.
4,136
I don't like our chances again tomorrow. Bugger :(
I guess that with so little time since that last drenching the field got
this will result in large puddles again on the strip.
Just hope the bike rid...
2,891,840
Came across this video while browsing the web.
I found it quite interesting and thought some of
you may find it the same.
http://www.youtube.com/watch?v=xRyOXDGgIh8
8,042
I've got the Jet Teng L39.
Kev also got the Jet Teng Hawk.
Really can't compare the Jet Teng to the HET as the HET only
has very thin fibreglass skin (similar to their Sniper) whereas the Jet
Teng has...
11,609
Yeh and that the Orange HK receivers suck when compared to Spectrum
Hey that's a pretty wide generalisation there Gaz. :)
Quite a lot of people are actualy have a great deal of success with the Oran...
8,042
Hey Steve or anyone else.
How do we get into the Penrith field? Is it off
Russel Street?
1,378,786
Thanks Steve, me and Kev will be there as
close to 9:30 as possible.
1,378,786
Wish you young blokes would lay off...:)
At least you're not ancient like me.
1,378,786
Not sure what you have in mind but I bought my aluminium case
at Bunnings for about $30.
It has foam separators inside but I found them too restrictive so I got
some soft foam I had lying around and c...
11,403
Looks Nice Gaz.
Seems to land a bit slower than the PC9.
Wonder how much it will cost.
26,272
I may be tempted to fly Sat and Sun this weekend
if conditions are good.
If so, Saturday will only be for an hour or two.
1,378,786
All the best mate.
So the BIG 50 hey!!!!!!!!!! :)
76,110
Welcome to the Jet Teng Club Gaz.
Any news when the Stumax Fan/Motor is due?
11,609
Here is a photo of a dolly I found on rcgroups.
No details of how it was made but looks like it's
all just cut out of depron(including the wheels) and
some steel rod for an axle.
473,528