Question for Claudio and Jason Can you have a look at this camera and let me know if it sounds any good. http://www.modelflight.com.au/products/FlycamOne_3_Core_VGA_Camera_w_TFT_Screen-9916-156.ht...

Thanks again Steve The 12 x 12 I need is a 3 blade, but after doing the maths a 4 blade 12 x 11 will be the ducks guts with the Hacker setup I'm using, and I found that through one of your links, the...

Yeh !!!! Ha ha ha ha ha ha!!!!! Nice response, I would have expected nothing less, full marks mate.

Jason Steve is up the coast with the family on holidays and wont be back until about the 6th of Jan. Rob Is it uncomfortable or is having props coming out of your arse something that you do regul...

Hello Pilots Just thought I would drop this link on you all. I have done hundreds of google searches for a multitude of reasons all R/C but never come accross these guys. They are based in Maitland...

F 27C STRYKER IS BACK Yse folks you heard it here first. Model flight is resupplying. If you want one you have to pre order they will be available mid May for the sum of $329 PNP. Just thought I wouk...

You are in the same boat as Kieran (scratching your head) His little 450 deceided to commit aviation today while flying perfectly. It carried out a half heimlic following by an impersonation of jour...

Nice explaination Rob, could not have said that any better if I tried Sorry to hear old faithful tried to decapitate you. Gazz

Hey Rob I found the extra set of stronger rubbers for the rotor head and the spare main motor gear. I have them in my flying bag and will give them to you next time we get a chance to fly. Gazz

Just got back from the field, gave my Trex 600 Airwolf its maiden flight. Very very happy with the first flight,trim was almost spot on and only have to give 2 clicks of aileron right to get it into ...

Thats entirely up to you Rob. There are pros and cons for both systems. The torque shaft is less likely to fail during flight and will probably only fail after an impact. The rubber band driv...

No Rob Tail strikes during landing with Helis with torque shafts will regularly strip those gears to. Happens with the Trex 600. The short answer is NO. You have to strip the rear end of the h...

Thanks guys I thought that was prettty much the case, BUT.... my Trex always hangs its arse when batteried up and ready for flight, and it hovers like a champion with almost no trim adjustments apart...

Hey Andrew I remember you saying you had to add some ballast to the front of your HK500 when you fitted it in the EC 135. How did you work out the correct C of G (so to speak) or did you just te...

Hi Kieran Ive got a pretty good set of drivers, but if its got Align on it and it less than $20 I have a set. Thanks. Gazz

If you fly mode 1 fixed wing. I would not reccommend trying Mode 2 for helis. You will completeley blow up your brain thinking about the hand eye motor control. I fly my heli mode 1 and I have no is...

Hi Pete Nobody does a build video as good as Finless Bob. I studied his Trex 600 build videos and they are seriously the goods. But with that said let your own grey mater have a bit of a thin...

Howdy All Here is a link to the guys I bought my Airwolf fuse off. And by the way, I picked it up yesterday and this thing is just awsome, so if you want to be in on the best deal you will e...

Hey Rob Im glad that you are having fun with the heli, remember little steps is the only way to go. You will probably find you are chasing the tail because the ground effect of the really low hover...

Hey Rob Thanks for the offer, but as we speak I have a couple on route from HK. As it turns out there is no great hurry anyway, my Airwolf fuse has been distributed by Flying Hobby and started its t...

Well done Kev Trust you to find that ancient (BUT REALLY COOL) footage. Will probably be 2 or 3 weeks before the body arrives, but I can deal with that, like your PC9 really cool shit is worth waiti...

Howdy All Thanks for the support guys Andrew - with all due respect all I can say is Yeh right mate. Good luck with that. Sydrob - dont forget your video camera. Good videos of maidens are an ess...

Thanks for the link Andrew I have emailed the supplier and they have been informative and very helpful. So I have just ordered and paid for one of these babies. http://www.flying-hobby.com/sh...

brotherblonde Wrote: (15-10-2010, 06:04 PM) -- Gaz, make sure you get "servo slow" for those retracts please. A nice, slow extension is a pleasure to behold. :) -- I've been doing quite a bit of rese...

Thanks for your help guys Am getting closer to purchasing an Airwolf fus for the mighty 600 Gazz

Thanks Rob But my Heli is a 600 mate although the 500 bodies look sweet they just dont fit and that is where the delema is! Heaps of companies have after market fuses for 500s but fuses for 600 are ...

Howdy fellow Heli pilots Was wondering if any of you have come across a supplier of authentic Airwolf bodies for the T Rex 600. I found this one on the net but cant find a supplier. Any info apprec...

Nice purchase Steve, I've been uming and aring about getting one myself for sometime. You just gotta love the Mustang, it really is a great looking aircraft. Just be aware that most of the electroni...

That looks sweet as Kev, looking forward to seeing that tear up the sky.

For those of you that asked to be notified. "Consider yourself notified". I am planning on maidening my Seb Art Sukhoi 140 tomorrow at Penrith, not to mention a few laps with the mighty DW. Hope to s...

Is it only one or allof them. Servo chatter is usually caused by the servo's internals Kev, could be the wire from the receiver or the connections, swap the servos around and see if the chatter stays ...

Frank. Here is the link to the build manual for the Seb Art Katana 50E http://www.sebart.it/download/Katana%20S%2050E%20V.2%20-%20MANUAL%20INTRO.pdf You will notice the prop recommended is 16 x...

I wont be flying at all this weekend... unfortunatley !!!! We are moving. The good thing is its 5 minutes closer to the field..... and you gotta love that. The best thing is I will have 1 bedroom a...

Welcome to the club Kev, That will be a very nimble beastie for sure.

Looks nice Frank. Is that the 30 or the 50 size, I had a Seb50 Katana in the black and yellow but one of the wings literally fell off at about 200 ft and she died. Sold what was left (which was actual...

Read MAAA MOP015 Aircraft from 7 to 25 kgs are classified as Large Aircraft from 25 to 50kgs are classified as Giant Although all aircraft between 7 and 50 kgs are classified as Heavy Models and r...

Seb Art Sukhoi 29S 140E Completed Flight Weight 5.4 kg Hacker A60-24S 10S 5000mAh 25-50C Nanotech Platinum Pro Opto 120amp ESC Full throttle 63 amps static

When Santa gives you something as cool as a that.... You feel like a 6 year old

Good Old Santa droped by and put this under my tree Happy Christmas to me:D:D:D:D

Thanks for all the advise guys.... appreciate it. Its always good to look at things through different eyes before making a desicion on spending a lot of money..... cheers Gazz

Ive got a nice big Kyosho Edge 540 Red Bull SE that you could get back in the sky for a song! Going cheap!

OK, this one is a request for opinions on my NEXT purchase. I have given up waiting for model flight to get the Seb Art Sukhoi 140 I have been waiting for for over 6 months. These are the 2 aircraft...

Good stuff George Thats a nice looking ride. Our runway is certainly long enough to handle it, I dont think that would need to land too fast, you just need to concentrate on getting your approach rig...

I think Steve is in the middle of building one of those Arron.

Here is a sneak peek at my Kirby Chambliss Red Bull Edge 540, just waiting on servos to finish the majestic beast off. This thing runs a Dualsky MG5050 an will twist itself out of your hands running o...

Hi Jason Steve is the research guru on the Skyfuns, He is the one who burnt out a shit load of motors and ESC's trying to find a reliable motor that would supply serious YEEHAAAAAAAAAAA. I am runn...

All good moves Jason Welcome to Funjet world, all of the upgrades you have made are spot on, either you have been reading up on the Funjet forum or you are just a very clever dood. All us Funjet jun...

Finished my new Seb Art Katana 50. Just waiting on the Servos from Hobbyking as well as the Hacker Motor and Dualsky ESC to arrive from Model Flight and we will have lift off. My Sukhoi now has stab...

I am in the middle of a new build myself. What servos are you thinking of running. I have just ordered these beasties for my new build which also has a flight weight of 2800grams. http://www.hobbyk...

Congrats Chris Your a good pilot and the wings are well deserved. Just remember to relax and enjoy it up there! Gazz