I cannot Find my copy of Phoenix rc but i found my Phoenix usb link Any link of Phoenix rc to download

Update to Thread for Meteor buffs and some Fiqures to maybe help anyone that may be playing around with edfs and thrust etc So I'm been Playing around with the Dynam Meteor and swapped out the 6s s...

Old school

Have  you tried a load test on lipo Regarding repairing it, if you do attempt to repair it you need to be very careful working with lipos as the lipo could explode or catch on fire if your not carefu...

Now This would fit Nicely on My Stryker Edf setup  :twisted: https://www.aliexpress.com/item/32871030039.html?spm=a2g0o.detail.1000014.20.fc0e1e8bqBk8p6&gps-id=pcDetailBottomMoreOtherSeller&scm=100...

When I Think of Fpv I think Of This, you gotta watch it espeacially at 3:30 onwards the double gate Crash  :lol: http://https://www.youtube.com/watch?v=QgOWVWyQJis

secant0give Wrote: (25-08-2019, 12:26 PM) -- Awesome!! That look great Remember the powerlines are hard to see with FPV Ask me how I know -- Woohoo, I Fpv with The Stryker Today only Did a  few la...

Rossy Wrote: (24-08-2019, 11:17 PM) -- As an FYI the micro cam I was using on my B-25 today was https://www.banggood.com/CM275T-5_8G-25mW-48CH-NTSCPAL-Mini-VTX-600TVL-FPV-Camera-for-DIY-Micro-FPV...

Looks like a nice Day Today, Hoping to be done for a couple of hours to maiden the Meteor and Hotliner  and get some T28 flying :)

After a Maiden Last weekend on 5s lipo, i ended up frying my Esc , Now with a New Esc Installed 100 amp Turnigy Plush with all the heat shrink removed and cable Tie heat sink on. I have Tested the Se...

Still Waiting for my Pin stripe to come in the mail, but got my water sticker decals and cut and custom fitted where i thought it would look best. Making the underside of plane a yellow highlighted t...

robair Wrote: (24-08-2019, 08:23 PM) -- Thanks for resurrecting this thread Stephen and sharing your speed freak skills. Good to see you are still the king of magic smoke esc’s ? and high speed mayhe...

So The Maiden of the Hotliner Today revealed a couple of issues,  Major issue was it was tail heavy even though my cog line looked ok, so i was flying on the edge of the seat and soon as i took power...

Nice little spot, looks like a very calm day  :)

Hoping for some Speed but really More Torque than Top Speed, So  Pull ups and take offs are easier. Slowly building when i have some spare time. Looking at strengthening the wing connection points...

Who is going to buy This, Its in Stock Australia warehouse https://hobbyking.com/en_us/h-king-flycat-70mm-12-blade-edf-jet-1042mm-41-pnf.html (https://hobbyking.com/en_us/h-king-flycat-70mm-12-...

Decided to go 6s lipo Edf Version as i have a several 6s lipos already, Turnigy 100Amp Esc Installed

Thanks for the Input Guys, will save a little more cash and get the right stuff.

This is a Interesting  Site https://www.turbines-rc.com/en/ (https://www.turbines-rc.com/en/)  They actually sell This in the You tube clip below, retractable edf unit that sounds amazing. https...

Yes there are many planes,  https://www.aliexpress.com/item/32602599605.html?spm=a2g0o.cart.0.0.4d9f3c00MxuZmt (https://www.aliexpress.com/item/32602599605.html?spm=a2g0o.cart.0.0.4d9f3c00MxuZmt)

So the Masking up and Painting begins  :) Paint Used is what i had in the shed, which i warmed up the Paint can in hot water to increase pressure and flow as they where old half empty cans. So i mask...

Some Home made decals added To Hotliner using the old school method of clear adheasive label paper and gloss clear coat on top of ink, but you can use any clear spray coat as pictured.

Gabino_Huerta Wrote: (08-08-2019, 10:43 AM) -- Hi Guys, I would like to go to the club next Thursday 15. I paid my membership long time ago and I still don't have the access code. Do you know w...

Painting progress, Notice the Cockpit Canopy is not stock Meteor, I used an Old Jet Tiger canopy instead as its very slim line and adds a different look.   Not super happy with the crisp line edge...

Looking at upgrading my spektrum dx7 Transmitter and really cannot decide on what one stick with spektrum or frsky or ? So that being the case what do you guys think of this multiprotocal transmitt...

So I noticed That Edf's now can come in 13/14/18 blades, hence my 90mm Edf 12 Blade may get a upgrade to 18 Blade if i can order the rotor. I behind the Times, i need to study and get up to date with ...

Gabino_Huerta Wrote: (11-08-2019, 06:39 AM) -- Busboy Wrote: (09-08-2019, 01:38 AM) -- Gabino_Huerta Wrote: (08-08-2019, 10:43 AM) -- Hi Guys, I would like to go to the club next Thursday 15. I pa...

Interesting Fiqures for Hotliner Prop Size 11x12 Carbon Folding prop Run Specs https://www.ecalc.ch/index.htm (https://www.ecalc.ch/index.htm)

Sunday flight test of the Flash T carbon Hotliner on 5s was a treat A lot faster and a bigger smile. Motor came down warm not hot at all. Ordered a 13x10 prop, 14x10 and 15x10 prop so i can do some te...

Another great weekend of flying with perfect weather both Saturday and Sunday  :)

Kieran has the Dynam meteor, and it Flies Nice. Yes the wheels are a concern with the our grass runway, i have thought about the need to increase the wheel diameter of the stock wheels to help compens...

Great Day Flying, a few ended up coming down. Thinking of heading down again Tommorow if Weather is Nice again

secant0give Wrote: (02-08-2019, 10:11 AM) -- Hey that should be a real hoot to fly Steve !! What day will you be down at the field? -- Was Down Today, It Flew well But not Fast as i would like, 4s ...

I thought i keep the Meteor Posts in this Thread that relates, So I Couldn't afford the Eflite Havoc (https://www.amainhobbies.com/eflite-havoc-xe-80mm-edf-pnp-electric-ducted-fan-jet-airplane-1041...

Hotliner repairs, FLASH T FULL COMPOSITE HOTLINER IMPORTED FROM USA After smoking out the Hot liner last visit due to running 5s lipo instead of the 4s lipo, i needed a replacement for my ber Expens...

TwoDogs Wrote: (30-07-2019, 05:44 PM) -- samste Wrote: (27-07-2019, 11:39 AM) -- Beautiful day and no one here -- Hi Steve, I'm the guy who was there when you first arrived.  It was nice to chat wi...

Beautiful day and no one here

Weather looks good for tomorrow, hoping to dust off some rc and be out there for some more flight time

helijeli Wrote: (12-07-2019, 11:41 PM) -- Looks like it’s going to be very windy tomorrow. Sunday will be the better day - wind up to around 25kph. I’ll probably be down Sunday morning. -- Weather ...

Any update to field Condition, ?

https://www.modelflight.com.au/e-flite-havoc-xe-80mm-edf-jet-bnf-basic.html (https://www.modelflight.com.au/e-flite-havoc-xe-80mm-edf-jet-bnf-basic.html)

https://www.banggood.com/TOBYRICH-SmartPlane-Pro-FPV-Smartphone-Controlled-Mini-RC-Aircraft-with-5_8Ghz-40CH-720576-FPV-Camera-Indoor-Bluetooth-Plane-Support-iOS-Android-with-Joystick-for-Beginners-p-...

I had to show this Video, as i love edf's and speed and only wish i was flying this machine  :) https://www.youtube.com/watch?v=619d53SXqQU

So is Anyone Thinking of Flying Tommorow ? or is the Field Too Wet

peterh Wrote: (23-06-2019, 03:32 PM) -- Gate is working. -- :)

Just got back, Actually the wind was nil till 10am and then it was a bit of Wind on and off but was light/moderate  no where near gail force or strong, But i expect the wind  to pick up again late th...

Rc Large Scale Jets In Quakers hill Today. https://www.hawkesburygazette.com.au/story/6217253/replica-jet-show-set-to-run-for-charity/

I'm Confused, council lock ? wheres Prcac Locks ? First weekend free for a long time and i was going to come done  :(

Busboy Wrote: (04-10-2018, 03:56 PM) -- By the looks of the rain forecast, I doubt there will be any flying this weekend :-( -- I think your Right