[Indolingo]

You could allways try a 16X8 2 blade prop. Have you got an Amp meter ?
Just check to see that it's not pulling too much current. If it is go for a 16X6 but I think the 16X8 would fly it probably better and certainly spool up faster than the original 4 blader and it will likely be cheaper too.

http://hobbyking.com/hobbyking/store/__9..._16x8.html

Here's the 16X6 as well

http://hobbyking.com/hobbyking/store/__9..._16x6.html

I'd order a couple of each as wooden props are a little easier to break than plastic ones.


Amp meter/Wat meter can be found here

http://hobbyking.com/hobbyking/store/__1...lyzer.html

Do prefer the original 4 blade prop - so there is no replacement or similar ?