23-08-2013, 07:01 AM
Here's a couple of close up Pics of the front of the fuse and the air duct around the motor.
It must work reasonably well because the prototype use to land with the motor dead cold after 2 mins is of absolutely flat stick flying, I measured the static current draw at just over 50A, It makes me think I might be able to push the motor just a little bit harder.
It must work reasonably well because the prototype use to land with the motor dead cold after 2 mins is of absolutely flat stick flying, I measured the static current draw at just over 50A, It makes me think I might be able to push the motor just a little bit harder.
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci