21-08-2013, 10:58 PM
Here's the former that that connects and aligns the wing to the fuselage. It's really easy to get this to line up spot on.
You just have to follow the steps.
clamp and drill the two plywood pieces together, the dowel plate that is bonded onto the wing and the former that is bonded into the fuse. Fit the dowles and glue them into the plate that gets bonded to the wing. check that they both fit together snugly, they should, having being drilled together.
Trial fit them to the fuse
Here's the two pieces together being trial fitted in the fuse
You just have to follow the steps.
clamp and drill the two plywood pieces together, the dowel plate that is bonded onto the wing and the former that is bonded into the fuse. Fit the dowles and glue them into the plate that gets bonded to the wing. check that they both fit together snugly, they should, having being drilled together.
Trial fit them to the fuse
Here's the two pieces together being trial fitted in the fuse
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci