16-08-2013, 03:48 PM
Here's the first GRP Dynamite fuse layed up in the new mould
It's epoxy resin with two layers of 4oz plain weave cloth all over and a third layer from about the C of G forward.
Hopefully it will come out of the mould nicely, will have to wait 'till monday to find out
and a view from the nose looking through the middle
It's epoxy resin with two layers of 4oz plain weave cloth all over and a third layer from about the C of G forward.
Hopefully it will come out of the mould nicely, will have to wait 'till monday to find out
and a view from the nose looking through the middle
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci