09-08-2013, 03:40 PM
Here’s the start of the fuse mould.
The plug together with the parting board has been painted with gel-coat after that’s hardened but still tacky, then 2 layers of 6 Oz cloth then 3 layers of 15 Oz Tri Axial cloth.
Here it is removed from the parting board
Now it’s rouhly trimmed up ready for waxing some plasticene and then a spray with PVA before laying up the othe side. both sides will have a final trim together after side 2 is lated up.
The plug together with the parting board has been painted with gel-coat after that’s hardened but still tacky, then 2 layers of 6 Oz cloth then 3 layers of 15 Oz Tri Axial cloth.
Here it is removed from the parting board
Now it’s rouhly trimmed up ready for waxing some plasticene and then a spray with PVA before laying up the othe side. both sides will have a final trim together after side 2 is lated up.
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci