30-07-2013, 03:37 PM
Thanks 'tipper 
Here are the plugs for the wing center fairing and the left & right servo fairings. The servo fairings on the the proto type were made by assembeling two seperate fairings together these ones are all in one peice. The prototype still doesn't have a wing center fairing so the first one out of the mould will go on there. It should make it a little slipperier.
Hopefully the won't be to hard to lay up. The center fairing should be no drama at all.
Just a couple more coats of wax then some PVA and I'll be ready to take moulds from the plugs. The finish is Upol reface. I found out that VG auto paints have it in 1 L tins for about $55.00 Unfortunatly I didn't know this and got a 2.5L tin...... It'll find it self a use tho these things allways do
Here are the plugs for the wing center fairing and the left & right servo fairings. The servo fairings on the the proto type were made by assembeling two seperate fairings together these ones are all in one peice. The prototype still doesn't have a wing center fairing so the first one out of the mould will go on there. It should make it a little slipperier.
Hopefully the won't be to hard to lay up. The center fairing should be no drama at all.
Just a couple more coats of wax then some PVA and I'll be ready to take moulds from the plugs. The finish is Upol reface. I found out that VG auto paints have it in 1 L tins for about $55.00 Unfortunatly I didn't know this and got a 2.5L tin...... It'll find it self a use tho
these things allways do“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci