21-02-2013, 10:10 AM
Thanks for the Warning smuzz,
The Trojan is made of EPO and I'm using EPS, I've never tried to Iron on film to an EPO model. I have had some trouble with EPP in the past.
EPS is no trouble to cover with Iron on film. You do have to be carefull that you don't get it too hot. So you cant bore the heat into it like you can with balsa but it can certainly be covered quite nicely with Iron-on film. I've done it quite a few times in the past. My Skyfunjet is covered with Red Iron on film.
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci