13-02-2013, 05:19 PM
Yep that's right this is the only way make it strong enough at the thin edge up the front.
You can see what I mean from the photos
And here's it is with the hatch on The original design was closed up at the front of the fuse but I wanted access to get at the motor screws and the ESC.
There is room under the ESC to slide the batterys forward to adjust the C of G. That way I can use different packs if I want to.
You can see what I mean from the photos
And here's it is with the hatch on The original design was closed up at the front of the fuse but I wanted access to get at the motor screws and the ESC.
There is room under the ESC to slide the batterys forward to adjust the C of G. That way I can use different packs if I want to.
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci