29-01-2013, 04:57 PM
(29-01-2013, 05:39 AM)Flying fisho Wrote: Wire tensions appear consistant when moving the servo arm.
Control Horn extension?? Not sure what you mean and nothing in the kit seems to match that description. There was an extended servo arm that screws onto servo arm supplied with servo's.
The extended servo arm was what I was refering too.
Sorry about my previous post being a little unclear.
It's good that the tension remains the same right through the rudder's travel.
Please post some pics
Frank AKA wingtipper, had a lucky escape with his MX2 on Satterday. He managed to shatter it's propellor against the powerlines then fly it back for a nice landing on just the stubs of the wooden prop. Other than the wooden prop being in shards, there was no other damage to the airframe at all !!
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci