22-01-2013, 08:05 PM
HMMM this was my thread . hope it helps , i havent read back through it yet . but one thing i can assure you , if built properly it will be very hard to fault . good purchase .
http://forum.rcflyingclub.com/showthread.php?tid=724
no need to strengthen the undercarraige , just paint it with epoxy , on the inside of the fuse . i'm just a phone call away if you have issues . but the plane is very well put together , no mods required . get some 3 inch light foam wheels , and a 15x6/ lightwood prop . leave the wheel pants off . cheers . and mine came with a plastic bag , no instructions, full of spares,( ply wood that had dovetail cutouts) after mucking around with them i could form a cube , which had pre cut holes through the centre , i worked out that this was the electric conversion kit . i just hard face epoxyed it on , and drilled some holes for bolts and nuts ( supplied in pack ) . hope yours is the same . just take your time it will be worth it in the end. 30hrs
http://forum.rcflyingclub.com/showthread.php?tid=724
no need to strengthen the undercarraige , just paint it with epoxy , on the inside of the fuse . i'm just a phone call away if you have issues . but the plane is very well put together , no mods required . get some 3 inch light foam wheels , and a 15x6/ lightwood prop . leave the wheel pants off . cheers . and mine came with a plastic bag , no instructions, full of spares,( ply wood that had dovetail cutouts) after mucking around with them i could form a cube , which had pre cut holes through the centre , i worked out that this was the electric conversion kit . i just hard face epoxyed it on , and drilled some holes for bolts and nuts ( supplied in pack ) . hope yours is the same . just take your time it will be worth it in the end. 30hrs
patience !! paaatience !! paaaaaatience paaaaaaatieeence dooooohhhh !!!
DANGER WIFE CAN READ FORUMS . love you darling . sig changed .