04-11-2011, 08:38 PM
(04-11-2011, 07:55 PM)gbanger Wrote: You D man Steve, I will look forward to using your clever piece of equipment as soon as I finish my new twin rig fun jet.
Can you tell me what the measurement is rail to rail, the twin could foul on the rails.
Gazz
Gazz the clearance 410mm wide from inside edge of the two conduits.
So if anyone wants to use the launch pad they are more than welcome, i have found with my Stryker Q and 27c it has underside fins so there is no chance of blade hitting side if it decided to skew sideways these fins are only about 200mm apart.
Skyfun Funjet has no underside fins so if you wanted added safety, just in case the plane skewed on launche pad during take off just glue a couple of small control horns to underside.
The distance apart would have to be more than your prop clearance and no more than 400mm apart, Suggest approx 250mm apart would be just fine as its there only as a guide if the plane decides to skew on take off.
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down