28-07-2011, 09:57 PM
This was the Setup i had in the Stryker i Was Flying At Prcac that ended up hitting the side of the power Tower, which ran on 3s or 4s with
80 amp speedy.
Motor was 1100kv 3542 or similar
http://www.hobbyking.com/hobbyking/store...oduct=2139
Running 10x10 APC prop, or 11x10 Prop
You will need to custom make a motor mount using
http://www.hobbyking.com/hobbyking/store...oduct=4687
And some underside rectangle piece of aluminum for support of screws going through from motor mount to underside
80 amp speedy.
Motor was 1100kv 3542 or similar
http://www.hobbyking.com/hobbyking/store...oduct=2139
Running 10x10 APC prop, or 11x10 Prop
You will need to custom make a motor mount using
http://www.hobbyking.com/hobbyking/store...oduct=4687
And some underside rectangle piece of aluminum for support of screws going through from motor mount to underside
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down