03-07-2011, 09:10 PM
Dolly Setup looks Good, It Does seem to look a little low to the ground, my concern would be of prop hitting ground, maybe larger wheels for some more height ?
and yes that is similar to what i was thinking except using pen like holders for a deeper hold but servo arms look like they will do the trick.
Have you Tested it out on the grass yet.
Steve
Simon in regards to the A-10, I SWAPPED OUT the stock 3s ESC's to 25 amp 4s ESC's and Running 4s 2200ma 30c
Esc's i Using
http://www.hobbyking.com/hobbyking/store...oduct=2167
Cheaper Esc's
http://www.hobbyking.com/hobbyking/store...duct=11616
[/align]
and yes that is similar to what i was thinking except using pen like holders for a deeper hold but servo arms look like they will do the trick.
Have you Tested it out on the grass yet.
Steve
Simon in regards to the A-10, I SWAPPED OUT the stock 3s ESC's to 25 amp 4s ESC's and Running 4s 2200ma 30c
Esc's i Using
http://www.hobbyking.com/hobbyking/store...oduct=2167
Cheaper Esc's
http://www.hobbyking.com/hobbyking/store...duct=11616
[/align]
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down