13-06-2011, 10:21 AM
(13-06-2011, 08:53 AM)robair Wrote: G'day Stephen
Nice Stryker mods, 10*10 prop must be a tight fit. Seeing as the weather is so crap I was considering ruddering up my Stryker as today's project. Any hints for me there?
Cheers
Rob b
Thanks Rob, And It Flies So Sweet its lots of Fun.
I Found it a little more Involved with the install of Rudders as i modded the motor mount and pushed the fins forward nearly two inches so i could get the 10x10 prop in and it will fit a 11 inch prop easy.
then i cut the back end lips flush where the fins hooked under.
As you can see the motor sits way back giving me room for rudders.
Servo install straight forward, just two cheap servos parallel together.
Guys agreed on Sat it's a Quiet Flier with the 10x10 and low kv motor but still shoots up in a blink.
Can Post more Detail pics if you want.
But if your going to leave the motor setup as is it should be a little easier.
Steve
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down