06-06-2011, 01:30 PM
You could also just use the power Supply from main battery rather than separate battery for bec.
Just Solder pos/neg to Main Esc Pos/Neg. Thats It.
Keeping in Mind what does your Bec Voltage Work At.
Mine works up to 10s lipo, was using in 6s setup Skyfun with 200amp Esc
Steve
Resurrected My old Stryker Frame and did some Mods.
Emax 1100kv, 10x10 Prop 3s Lipo 40amp max output with 80amp speedy.
Sound Db output Tested at 72db and Thats with some inbalance of Prop.
New design Motor Mount and some new addition Rudder Control.
Just Solder pos/neg to Main Esc Pos/Neg. Thats It.
Keeping in Mind what does your Bec Voltage Work At.
Mine works up to 10s lipo, was using in 6s setup Skyfun with 200amp Esc
Steve
Resurrected My old Stryker Frame and did some Mods.
Emax 1100kv, 10x10 Prop 3s Lipo 40amp max output with 80amp speedy.
Sound Db output Tested at 72db and Thats with some inbalance of Prop.
New design Motor Mount and some new addition Rudder Control.
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down