[samste]

Hi Paul

Pic Below Transparent sticker from office works and spray from Bunnings.

I just printed as many pics etc as i could fit on one sheet. Then printed it out.
Let the Ink dry for 5 min then sprayed the whole sheet with the sealer very thick (my sheet looked wet but it dryed quick) and let it dry for about 30min or so. The spray did not make ink run.
Then cut out each Decal and Presto, Then i just stuck them on the Plane.
If you wanted afterwards you could do a clear coat of polyurethane over the top when they are stuck on the plane.
(P.s Tried the polyurethane as a sealer but brushing on made ink run, but after sealer was on it was ok to use)

Just Rememeber use the sealer spray only on the Transparent sticker sheet only not on the foam It will eat foam.

Here are some web sites for inspiration, there is suprising alot of stuff on the web.
you could use all sorts of clip art etc

http://www.skyhighhobby.com/airplane-decals . Quite a few on this site to view.

http://images.google.com.au/images?hl=en...e&resnum=4

http://images.google.com.au/imgres?imgur...N%26um%3D1