[samste]

lol thats awesome steve..

i have just the right little fella who would love to do some gi joe retrievel!
good work on the hatch it should be alot more acurate than having to pull inverted prior to drop..

Thanks, Yes hoping it will all work ok, did adjust hatch to open approx 40 degrees, and did a few drops tests inside like i did on video clip, seems to work ok.
Packing the parachute man i think needs to be right to fall out and open properly as the chutes are thin plastic and rigid a bit so it could get stuck in box but i think in flight it should be ok and hopefully parachute down nicely.

On Another Note
Speed records here i come, I think this is the ultimate motor for the Funjet ( can't wait to give it a run on the weekend wih APC 7x6e prop)
Just came in the mail today cost me approx $30 delivered, hong kong supplier.
I think the kv/amps/prop size that the motor has should work a treat, considering the stryker motor that im using at the moment is only 1880kv and 7x5e prop and that is fast.
The only thing im not sure of is the actual recommended model weight for motor to push as its says below for 450 class Ele. Heli. weight ?


EMAX HL2215/450 With Fan NEW



HL2215/450 is special one for the electirc helicopter 450 class, it has the best performance for 3D fly. It will your best choice the 450 calss Heli
Specification
No. Of cells 3-4* Li-Poly
RPM/V 3700
No load current / 10 V 0,5 A
Current capacity 40 A/60 s
Dimensions 22*15 mm
Shaft diameter 2.3/3.17 mm
Weight 62 g
Recomended model weight 450 class Ele. Heli.
Recomended prop without gearbox 6"-8"