[samste]

I Have Finally decided To Do It, Since i have had the Fiberglass Cloth for several months Now, Inspired by pauls Glassing Job on His Plane.
Was going to use the existing Stryker Frame, But Decided to Go Fresh and keep the Old one as is as it Flies Great Still, Till the new One is Built and then Transfer over the Electric Setup, that so far hasn't let me Down.

Also Looking Forward to a Real Great Fluorescent Enamel Paint Job with High Gloss smooth Finish, Inspired by Gary's Funjet Paint Job.
But Still Keeping to the Fluorescent Yellow Top and Fluorescent Orange / Red underside as i find these the best colors for myself for Visibility in the Sky.

STRYKER NEW FRAME,FULLY GLASSED BUILD

1.
I have Reinforced the Frame with Carbon Rod across and front and back leading edges, (original Wasn't) and across the Width of Frame.
2.
Totally Glassed the back overlapping glass several inches To top side.

3.
Once Dry will then Glass top Side overlapping to underside several inches, Therefore leading edges will be Super Strong and whole Frame Totally Glassed and super strong.


   

Here is a Close Up Of Cloth for those not Familar with Fine Cloth used.
       


Steve