24-09-2010, 11:32 PM
Thanks Guys for the Advice i ended up cutting the film to epoxy the balsa with in as it had a fracture/Break, from hard forced landing that was caused from pushing the limits to Standard Frame without Modifying motor mount and causing motor mount and front nose to give way in flight.
I have custom installed a new strong motor mount and appears to be fine with test Flight This Afternoon.
Pics Below of carnage and repairs, Used http://www.hobbyking.com/hobbyking/store...duct=12587 for Repairs very Strong.
I have custom installed a new strong motor mount and appears to be fine with test Flight This Afternoon.
Pics Below of carnage and repairs, Used http://www.hobbyking.com/hobbyking/store...duct=12587 for Repairs very Strong.
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down