[samste]

Pterodactyl Ornithopter EPP Composite 1300mm Green pnf version

Hooking Up the Sound Module to your tx and rx

I found that the plug and play version the sound module will not work unless your using the RTF version tx and rx.

Everywhere on the web i found people having the same issue, even hobbyking chat could not help , "Just Plug into gear switch and all will work" They Said.
NOT THAT EASY I SAID, TRIED THAT AND ALL SETTINGS

Here is my Fix and Ready for Maiden on Weekend.

Using A Turnigy Receiver Control switch, link below

http://www.hobbyking.com/hobbyking/store...gy%20recei


I found that when i shorted out the positive and signal wire the sound would operate.
So i fitted the Turnigy Receiver Control switch to gear input and the relay output was used to short the Positive and signal wire of the Sound Module Lead.
and Just bridge over the negative and positive Individully.

Images attached

               

WARNING, DO NOT CONNECT ALARM LEAD TO RX AS THIS IS 12 VOLTS AND MAY DAMAGE UNIT/ RX
(THIS IS USED FOR RX OF RTF KIT THAT COMES WITH TX AND RX)

Future Mods to this Bird, Glide Lock mechanism for wings
Love to Install something like this into this Bird, but will maiden and fly it for a while before i start pulling it apart to mod

http://ovirc.free.fr/GLDAB_English.php

Link Above Interesting glide module