17-06-2012, 09:04 PM
Hi Guys,
I have been very consevative with my Stryker Edf, Only Running 5s lipo.
Well Today I flew it on 5s with Data Logger in Model and gave it full Throttle once i turned and on straight and it managed to push 204 km/h.
Installed 6s Lipo in which i have bench tested and it it Flew Fassssssssst.
Wow i had a big smile on my face as i full throttled low pass.
Unfortunately forgot to start data Logger for Speed but i Rekon i was doing at least 260 km/h.
6 s lipo, 96 Amps, 1608 Watts
Its All 6s Power Now, no Time for 5s Anymore
P.s Did The Prcac Rare Bear Team Proud with lots of touch and go's and full throttle flights today.
Edit Motor Specs, I'm still Under the 1650 Watts Max ? What can i Do ?
Specs:
RPM/v: 1850kv
Dimensions: 67 x 36mm
Shaft: 5.0mm
Voltage: 11.1V-22.6v [3s~6s]
Weight: 171g
No-load current: 3.5A/11v
Max burst current: 80A
Max Watts: 1650w
ESC: 100A
Resistance: 0.012 ohms
Thrust: 2650g [example based on 5 blade fan/6s combo]
I have been very consevative with my Stryker Edf, Only Running 5s lipo.
Well Today I flew it on 5s with Data Logger in Model and gave it full Throttle once i turned and on straight and it managed to push 204 km/h.
Installed 6s Lipo in which i have bench tested and it it Flew Fassssssssst.
Wow i had a big smile on my face as i full throttled low pass.
Unfortunately forgot to start data Logger for Speed but i Rekon i was doing at least 260 km/h.
6 s lipo, 96 Amps, 1608 Watts
Its All 6s Power Now, no Time for 5s Anymore
P.s Did The Prcac Rare Bear Team Proud with lots of touch and go's and full throttle flights today.
Edit Motor Specs, I'm still Under the 1650 Watts Max ? What can i Do ?
Specs:
RPM/v: 1850kv
Dimensions: 67 x 36mm
Shaft: 5.0mm
Voltage: 11.1V-22.6v [3s~6s]
Weight: 171g
No-load current: 3.5A/11v
Max burst current: 80A
Max Watts: 1650w
ESC: 100A
Resistance: 0.012 ohms
Thrust: 2650g [example based on 5 blade fan/6s combo]
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down