31-01-2012, 05:27 PM
Flyjet X-83 Pusher or 64mm EDF 830mm (KIT)
http://www.hobbyking.com/hobbyking/store...duct=18252
After my Not so Good First hand Launch Of The Flyjet which Darren Pointed out that it possibly a RX or Tx Issue. We Pin Pointed that it was a Fault AR500 Spektrum Rx Causing the Twitches of control surfaces.
After Replacing The Rx it Flew For the Second Time and went Great not super fast but Ok. Third Flight i found that the Edf blade Decided to give way and brought it down. was running a crappy 3 blade 500 watt unit.
I have Now Gave it a Mini Make over as the colors before were a little hard to see and gave it a 64mm edf 7 blade 4000 kv 4s 80 amps 1100 watts setup that will make any lipo run for the hills
Took it for a test Flight this afternoon and what can i say it moves verrrrrry Quick easy 100mph plus on a fly by. I could not get rid of the big smile i had after the Flight, and i thought my Jetiger i had ages ago was Fast.
Flight time is now reduced to 3-4 minutes But thats a small Price to pay for SPEED.
http://www.hobbyking.com/hobbyking/store...duct=18252
After my Not so Good First hand Launch Of The Flyjet which Darren Pointed out that it possibly a RX or Tx Issue. We Pin Pointed that it was a Fault AR500 Spektrum Rx Causing the Twitches of control surfaces.
After Replacing The Rx it Flew For the Second Time and went Great not super fast but Ok. Third Flight i found that the Edf blade Decided to give way and brought it down. was running a crappy 3 blade 500 watt unit.
I have Now Gave it a Mini Make over as the colors before were a little hard to see and gave it a 64mm edf 7 blade 4000 kv 4s 80 amps 1100 watts setup that will make any lipo run for the hills
Took it for a test Flight this afternoon and what can i say it moves verrrrrry Quick easy 100mph plus on a fly by. I could not get rid of the big smile i had after the Flight, and i thought my Jetiger i had ages ago was Fast.
Flight time is now reduced to 3-4 minutes But thats a small Price to pay for SPEED.
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down