30-10-2009, 07:15 PM
Hi All
Thanks for all the Input and Ideas.
I Ended up Buying a couple of servers, to do it that way, But it was going to be To Difficult as server would have to be upside down or mixed on a spare channel.
So i Ended up going the way i was thinking and that Paul also Suggested joining the two together.
I did this Buy removing both sections and placing bar at hinge of elevator with right angles into elevator at both ends, avoiding any cut to Rudder arrangement.
Works Great and took about an hour to do,
Steve
[youtube]http://www.youtube.com/watch?v=O8KHjoZLLaE[/youtube]
Thanks for all the Input and Ideas.
I Ended up Buying a couple of servers, to do it that way, But it was going to be To Difficult as server would have to be upside down or mixed on a spare channel.
So i Ended up going the way i was thinking and that Paul also Suggested joining the two together.
I did this Buy removing both sections and placing bar at hinge of elevator with right angles into elevator at both ends, avoiding any cut to Rudder arrangement.
Works Great and took about an hour to do,
Steve
[youtube]http://www.youtube.com/watch?v=O8KHjoZLLaE[/youtube]
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down