29-10-2009, 08:38 AM
Gday Steve
What an odd setup, never seen anything like that before. I think you have a few options though.
1- Join the elevator halves and use a single attach point as per normal.
2 - Centre the servo in the fuselage and then use a servo horn that extends both sides of the servo and reconnect the 2 rods either side.
3- Use 2 servo's, one for each elevator half. Your King Max Tx will easily mix the 2 channels together.
Cheers
Rob Byrnes
What an odd setup, never seen anything like that before. I think you have a few options though.
1- Join the elevator halves and use a single attach point as per normal.
2 - Centre the servo in the fuselage and then use a servo horn that extends both sides of the servo and reconnect the 2 rods either side.
3- Use 2 servo's, one for each elevator half. Your King Max Tx will easily mix the 2 channels together.
Cheers
Rob Byrnes