27-08-2009, 12:03 AM
I cannot see an issue as long as the cables between the motor and esc are big enough to cope with the amps, i would probably want the cables at least the same size as the esc wires if not bigger. as i cannot see voltage drop a major issue but heat generated from the amps flowing could be an issue and motor wires melting.( though that would be an extreme case scenario)
My A-10 has quite a distance 15cm from each motor to esc, i used a slightly thicker gauge wire just in case and it seems to be OK.
The same applied from battery to esc, i used a double + thickness gauge wire as its feeding two esc's and distance to front is 40cm
Steve
My A-10 has quite a distance 15cm from each motor to esc, i used a slightly thicker gauge wire just in case and it seems to be OK.
The same applied from battery to esc, i used a double + thickness gauge wire as its feeding two esc's and distance to front is 40cm
Steve
What Do You Mean Theres a Throttle Curve ?, Its Either all the way up or all the way down